Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 313 - 328 of 328 results:

Image:

Wrong - If the soffit is applied directly to the rafter eave, it forms a sloping soffit, which creates a pocket that can trap hot air and embers from a wildfire.

Wrong - If the soffit is applied directly to the rafter eave, it forms a sloping soffit, which creates a pocket that can trap hot air and embers from a wildfire.
Image:

Wrong -The top of the sump pump crock is too high above the crawlspace grade level for any water in the crawl to enter the sump.

Wrong -The top of the sump pump crock is too high above the crawlspace grade level for any water in the crawl to enter the sump.
Image:

Wrong – Compression and misalignment because insulation is not split around plumbing

Wrong – Compression and misalignment because insulation is not split around plumbing
Image:

Wrong – Compression and misalignment because insulation is not split around wires

Wrong – Compression and misalignment because insulation is not split around wires
Image:

Wrong – Conventional wood deck risks ignition from embers falling on the surface or from unmaintained vegetation burning below.

Wrong – Conventional wood deck risks ignition from embers falling on the surface or from unmaintained vegetation burning below.
Image:

Wrong – Insulation has misalignment, compression, and gaps

Wrong – Insulation has misalignment, compression, and gaps
Image:

Wrong – Spray foam installed with voids

Wrong – Spray foam installed with voids
Image:

Wrong – The stud was cut too long then not installed plumb and level.

Wrong – The stud was cut too long then not installed plumb and level.
Image:

Wrong – This second-story floor plan has red lines that indicate openings from the attic into the interstitial floor space

Wrong – This second-story floor plan has red lines that indicate openings from the attic into the interstitial floor space
Image:

Wrong – Where possible, design walls and specify window sizes and placement to minimize the use of studs around windows; and seal all wood-to-wood seams to minimize air leakage through walls.

Wrong – Where possible, design walls and specify window sizes and placement to minimize the use of studs around windows; and seal all wood-to-wood seams to minimize air leakage through walls.
Image:

Wrong – Window does not meet ENERGY STAR requirements

Wrong – Window does not meet ENERGY STAR requirements
Image:

Wrong: Drywall does not extend beyond the top plate of the interior walls. This installation has the potential for leakage at the sides where the ducts penetrate the side walls of the chase

Wrong: Drywall does not extend beyond the top plate of the interior walls. This installation has the potential for leakage at the sides where the ducts penetrate the side walls of the chase
Image:

Wrong: HPWH inlet and outlet are piped to mixing valve inlet and DCW make up, driving erratic HPWH and mixing valve behavior

Wrong: HPWH inlet and outlet are piped to mixing valve inlet and DCW make up, driving erratic HPWH and mixing valve behavior
Image:

Wrong: The exhaust air from one heat pump water heater is blowing into the intake of the heat pump water heater next to it

Wrong: The exhaust air from one heat pump water heater is blowing into the intake of the heat pump water heater next to it
Image:

Wrong: This air handling equipment is installed in the garage without isolating the equipment from the garage space

Wrong: This air handling equipment is installed in the garage without isolating the equipment from the garage space
Presentation:

Zero Energy Ready Home Training

Zero Energy Ready Home Training