Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 217 - 240 of 279 results:

Image:

The exterior of the home is wrapped in a continuous layer of rigid foam with all seams taped to provide a thermal, air, and moisture barrier and serve as a drainage plane, eliminating the need for house wrap.

The exterior of the home is wrapped in a continuous layer of rigid foam with all seams taped to provide a thermal, air, and moisture barrier and serve as a drainage plane, eliminating the need for house wrap.
Image:

The exterior walls of this home consist of two wall cavities: a 2x6 wall with plywood sheathing plus 8-inch I-joists sheathed with engineered wood; both cavities are dense-packed with cellulose for R-60 total.

The exterior walls of this home consist of two wall cavities: a 2x6 wall with plywood sheathing plus 8-inch I-joists sheathed with engineered wood; both cavities are dense-packed with cellulose for R-60 total.
Image:

The flush cut method for seismic retrofit bracing of a cripple wall allows the plywood sheathing to be attached directly to both the cripple studs and the notched section of the mudsill

The flush cut method for seismic retrofit bracing of a cripple wall allows the plywood sheathing to be attached directly to both the cripple studs and the notched section of the mudsill
Image:

The home is sheathed with rigid foam insulation and all seams and holes are taped to provide a continuous air barrier.

The home is sheathed with rigid foam insulation and all seams and holes are taped to provide a continuous air barrier.
Image:

The metal screening keeps insects out of the black mesh plastic fabric which provides a ventilation gap behind the home’s siding, which includes the ship-lapped cypress shown here.

The metal screening keeps insects out of the black mesh plastic fabric which provides a ventilation gap behind the home’s siding, which includes the ship-lapped cypress shown here.
Image:

The mistake of overdriven fasteners

The mistake of overdriven fasteners
Image:

The OSB sheathing is coated and taped at the seams to provide a weather-resistant barrier that can take the place of house wrap.

The OSB sheathing is coated and taped at the seams to provide a weather-resistant barrier that can take the place of house wrap.
Image:

The retrofitted flat roof has PV panels and walking mats installed over the roofing membrane

The retrofitted flat roof has PV panels and walking mats installed over the roofing membrane
Image:

The reverse block method for seismic retrofit bracing of a cripple wall uses a 2x4 attached to the sill plate to provide a means to attach the plywood cripple wall sheathing to the sill plate

The reverse block method for seismic retrofit bracing of a cripple wall uses a 2x4 attached to the sill plate to provide a means to attach the plywood cripple wall sheathing to the sill plate
Image:

The roof is constructed with a foil-faced radiant barrier sheathing.

The roof is constructed with a foil-faced radiant barrier sheathing.
Image:

The tape is applied with even pressure to ensure the seams in the rigid foam sheathing are air sealed on this manufactured home.

The tape is applied with even pressure to ensure the seams in the rigid foam sheathing are air sealed on this manufactured home.
Image:

The walls of this mixed-humid location home are constructed with moisture-resistant steel-framed expanded polystyrene R-34 wall panels that are designed to withstand winds up to 200 mph and level D seismic forces.

The walls of this mixed-humid location home are constructed with moisture-resistant steel-framed expanded polystyrene R-34 wall panels that are designed to withstand winds up to 200 mph and level D seismic forces.
Image:

The wood blocking for future PV panel installation extends above the surface of the top layer of polyisocyanurate rigid foam insulation installed as part of a flat roof retrofit

The wood blocking for future PV panel installation extends above the surface of the top layer of polyisocyanurate rigid foam insulation installed as part of a flat roof retrofit
Image:

These factory-built walls consist of 9.5-inch I-studs sheathed with coated OSB, faced with OSB, and dense-packed with cellulose; a second interior surface of drywall is added to provide a 1.5-inch cavity for electrical wiring.

These factory-built walls consist of 9.5-inch I-studs sheathed with coated OSB, faced with OSB, and dense-packed with cellulose; a second interior surface of drywall is added to provide a 1.5-inch cavity for electrical wiring.
Image:

This air handling unit provides outside air at the same rate as the air being exhausted from the bathroom exhaust fan; local kitchen exhaust is provided by a range hood with a dedicated makeup air intake and dehumidification is provided by a separate unit

This air handling unit provides outside air at the same rate as the air being exhausted from the bathroom exhaust fan; local kitchen exhaust is provided by a range hood with a dedicated makeup air intake and dehumidification is provided by a separate unit
Image:

This farmhouse was retrofit by removing the existing siding and adding taped insulated sheathing and battens before installing new siding

This farmhouse was retrofit by removing the existing siding and adding taped insulated sheathing and battens before installing new siding
Image:

This home is covered with coated sheathing. Wall portions that will be covered with stone have a dimple plastic moisture barrier and metal lathe that is being covered with plaster.

This home is covered with coated sheathing. Wall portions that will be covered with stone have a dimple plastic moisture barrier and metal lathe that is being covered with plaster.
Image:

This Houston home’s unique tri-generation system combines cooling, heating, dehumidifying, hot water, and power production and storage.

This Houston home’s unique tri-generation system combines cooling, heating, dehumidifying, hot water, and power production and storage.
Image:

This plastic mesh material creates an air space behind the siding and provides a route for water to run out of the wall in case of leaks.

This plastic mesh material creates an air space behind the siding and provides a route for water to run out of the wall in case of leaks.
Image:

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.

This roof is hurricane proofed with a coated insulated OSB deck sheathing that is caulked and taped at all seams with a water-resistant tape, then fully covered with a peel-and-stick membrane, and asphalt shingles.
Image:

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases

To reduce the risk of condensation on the interior of the roof sheathing in cold weather, the ratio of exterior (above-deck) insulation must be increased as a percent of total attic insulation as outside temperature decreases
Image:

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing
Image:

Two types of paint-on flashing (green and red) are installed on the walls and around the windows, over the coated sheathing which is taped at the seams.

Two types of paint-on flashing (green and red) are installed on the walls and around the windows, over the coated sheathing which is taped at the seams.
Image:

Typical Concrete Tile Roofs in Florida

Typical Concrete Tile Roofs in Florida