Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 97 - 120 of 830 results:

Image:

Capillary break at all crawlspace floors using ≥ 6 mil polyethylene sheeting, lapped 6-12 in., and placed beneath a concrete slab

Capillary break at all crawlspace floors using ≥ 6 mil polyethylene sheeting, lapped 6-12 in., and placed beneath a concrete slab
Image:

Capillary break beneath all slabs (e.g., slab on grade, basement slab) except crawlspace slabs using either: ≥ 6 mil polyethylene sheeting lapped 6-12 in., or ≥ 1 in. extruded polystyrene insulation with taped joints

Capillary break beneath all slabs (e.g., slab on grade, basement slab) except crawlspace slabs using either: ≥ 6 mil polyethylene sheeting lapped 6-12 in., or ≥ 1 in. extruded polystyrene insulation with taped joints
Image:

Catchment system

Catchment system
Image:

Caulk top and sides of window

Caulk top and sides of window
Image:

Cement board (shown in dark grey) is installed behind a tub.

Cement board (shown in dark grey) is installed behind a tub.
Image:

Cement board (shown in dark grey) is installed behind an installed tub and shower surround.

Cement board (shown in dark grey) is installed behind an installed tub and shower surround.
Image:

Check the moisture content of wall materials to ensure materials are dry before enclosing walls with drywall and siding.

Check the moisture content of wall materials to ensure materials are dry before enclosing walls with drywall and siding.
Image:

Clay roofs require a J-channel instead of typical L-shaped step flashing.

Clay roofs require a J-channel instead of typical L-shaped step flashing.
Image:

Clean taping areas and install 3" tape on vertical joint of upper insulation overlapping the horizontal joint

Clean taping areas and install 3" tape on vertical joint of upper insulation overlapping the horizontal joint
Image:

Closed-cell foam is sprayed into roof cavities along the masonry parapet wall to form a continuous air barrier between the wall and the sheathing of the flat roof

Closed-cell foam is sprayed into roof cavities along the masonry parapet wall to form a continuous air barrier between the wall and the sheathing of the flat roof
Image:

Closed-cell spray foam fills the roof joist cavities forming an air barrier between the masonry parapet wall and the roof sheathing

Closed-cell spray foam fills the roof joist cavities forming an air barrier between the masonry parapet wall and the roof sheathing
Image:

Common methods for plywood shutter attachment to wood-frame and masonry walls.

Common methods for plywood shutter attachment to wood-frame and masonry walls.
Image:

Complete water management strategy for a below-grade wall

Complete water management strategy for a below-grade wall
Image:

Comprehensive above-grade water management details for a crawlspace foundation include a capillary break over the crawlspace floor, slope the surface grade away, installing gutters that slope away, and capillary break under sill plate.

Comprehensive above-grade water management details for a crawlspace foundation include a capillary break over the crawlspace floor, slope the surface grade away, installing gutters that slope away, and capillary break under sill plate.
Image:

Comprehensive water management features include a capillary break (≥ 6-mil polyethylene sheeting) at all crawlspace floors

Comprehensive water management features include a capillary break (≥ 6-mil polyethylene sheeting) at all crawlspace floors
Image:

Concrete (4 inches thick at 5% slope) provides a pest-resistant perimeter around the foundation

Concrete (4 inches thick at 5% slope) provides a pest-resistant perimeter around the foundation
Image:

Concrete is poured into the rigid foam shell of the insulated concrete form (ICF) walls; a plastic water barrier has already been installed to protect the below-grade wall surfaces.

Concrete is poured into the rigid foam shell of the insulated concrete form (ICF) walls; a plastic water barrier has already been installed to protect the below-grade wall surfaces.
Image:

Concrete pavers set in 4 inches of sand provide a pest-resistant ground break at the building perimeter.

Concrete pavers set in 4 inches of sand provide a pest-resistant ground break at the building perimeter.
Video:

Concrete Slab over Polyethylene

Image:

Concrete slab over polyethylene sheeting as capillary break

Concrete slab over polyethylene sheeting as capillary break
Image:

Concrete slab pan flashing for doors

Concrete slab pan flashing for doors
Image:

Continuous L-metal flashing integrated with underlayment at roof-wall intersections

Continuous L-metal flashing integrated with underlayment at roof-wall intersections
Video:

Continuous Rigid Insulation Sheathing/Siding (1)

Image:

Cover lumber stored outdoors

Cover lumber stored outdoors