Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 121 - 144 of 462 results:

Image:

Gaps at shared common walls can be a significant source of air leakage in multi-family buildings

Gaps at shared common walls can be a significant source of air leakage in multi-family buildings
Image:

Gasket installed along entire seam of the modular home marriage joint

Gasket installed along entire seam of the modular home marriage joint
Video:

Get a Storm Ready Roof

Image:

Hanger Bolt Mounting with Flashing for Mounting PV Panels on a Round Tile Roof

Hanger Bolt Mounting with Flashing for Mounting PV Panels on a Round Tile Roof
Image:

Headers over windows and doors are insulated rather than solid wood.

Headers over windows and doors are insulated rather than solid wood.
Image:

Headers over windows on non-load-bearing walls are open to allow room for insulation.

Headers over windows on non-load-bearing walls are open to allow room for insulation.
Case Study:

High Performance Builder Spotlight: LifeStyle Homes

Video:

Hot Spot: Temporary Safety Bracing of an Engineered Wood Floor System

Video:

How to Frame a Gable Wall // Roof Framing Part 5

Image:

How to properly anchor a new home to its foundation with foundation sill plate, stem wall, and footing

How to properly anchor a new home to its foundation with foundation sill plate, stem wall, and footing
Video:

How to Properly Install Concrete or Clay Tile Roofing

Video:

Hurricane Straps

Video:

Hurricanes, Earthquakes & Tornados - Design of Wood-frame Structures for Extreme Forces

Video:

IBHS Research Center: Putting Fortified Construction to the Test

Video:

IBHS' Guide to Gable End Bracing

Image:

ICF bricks are stacked to form hollow walls that are reinforced with steel rebar before the concrete is poured in

ICF bricks are stacked to form hollow walls that are reinforced with steel rebar before the concrete is poured in
Image:

ICF forms are filled with the use of a concrete pumper truck

ICF forms are filled with the use of a concrete pumper truck
Image:

ICFs provide continuous wall insulation from the roof to the footing with very little thermal bridging

ICFs provide continuous wall insulation from the roof to the footing with very little thermal bridging
Image:

If fans share common exhaust duct, back-draft dampers installed

If fans share common exhaust duct, back-draft dampers installed
Image:

Improper continuous load path design lacking bracing results in the failure of gable end walls under high wind conditions.

Improper continuous load path design lacking bracing results in the failure of gable end walls under high wind conditions.
Image:

In areas prone to high winds and hurricanes, double vertical “jack trim” and horizontal “header” and “sill” studs are recommended on all sides of window and door openings.

In areas prone to high winds and hurricanes, double vertical “jack trim” and horizontal “header” and “sill” studs are recommended on all sides of window and door openings.
Image:

In high-wind regions, special hardware is used for most framing connections; toe-nailing is not acceptable.

In high-wind regions, special hardware is used for most framing connections; toe-nailing is not acceptable.
CAD File:

Inset band joist at mudsill - 1 1/2 inch rigid insulation

Preview Image
Inset band joist at mudsill - 1 1/2 inch rigid insulation
CAD File:

Inset band joist at top plate

Preview Image
Inset band joist at top plate