Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 841 - 864 of 899 results:

Image:

Wrong – A clothes dryer that vents to the crawlspace can contribute moisture to the crawlspace; this can result in damp, molding, and rotting insulation

Wrong – A clothes dryer that vents to the crawlspace can contribute moisture to the crawlspace; this can result in damp, molding, and rotting insulation
Image:

Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure

Wrong – A poorly sealed window and window well allow bulk water to enter the crawlspace from ground that slopes toward the structure
Image:

Wrong – Building materials are being stored outdoors with no protection from weather

Wrong – Building materials are being stored outdoors with no protection from weather
Image:

Wrong – Building materials with visible signs of mold have been used

Wrong – Building materials with visible signs of mold have been used
Image:

Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed

Wrong – Drain pipe has been cut and foundation penetration has not been properly sealed
Image:

Wrong – Driveway is not sloped away from the house

Wrong – Driveway is not sloped away from the house
Image:

Wrong – For proper detailing of vinyl around windows and other obstacles, use utility trim, punch snaplocks into siding, and do not overlap directly beneath a window.

Wrong – For proper detailing of vinyl around windows and other obstacles, use utility trim, punch snaplocks into siding, and do not overlap directly beneath a window.
Image:

Wrong – If dimpled plastic is used it should be trimmed to drain down at the bottom rather than up where water can collect in it.

Wrong – If dimpled plastic is used it should be trimmed to drain down at the bottom rather than up where water can collect in it.
Image:

Wrong – Known as a Hugel Swale, organic matter like sticks and leaves break down into compost and fill the swale full. This limits the swale’s ability to filter rainwater.

Wrong – Known as a Hugel Swale, organic matter like sticks and leaves break down into compost and fill the swale full. This limits the swale’s ability to filter rainwater.
Image:

Wrong – Misalignment of the tie reduces the embedment and enables the brick veneer to be pulled away.

Wrong – Misalignment of the tie reduces the embedment and enables the brick veneer to be pulled away.
Image:

Wrong – No polyethylene sheeting vapor barrier is installed on the crawlspace floor

Wrong – No polyethylene sheeting vapor barrier is installed on the crawlspace floor
Image:

Wrong – Penetration through the floor is not air sealed

Wrong – Penetration through the floor is not air sealed
Image:

Wrong – Polyethylene sheeting does not completely cover the aggregate and the footing

Wrong – Polyethylene sheeting does not completely cover the aggregate and the footing
Image:

Wrong – Polyethylene sheeting does not extend beyond edge of aggregate to separate the footer from the stem wall which will be poured next

Wrong – Polyethylene sheeting does not extend beyond edge of aggregate to separate the footer from the stem wall which will be poured next
Image:

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation

Wrong – Rain barrel installed without an overflow spout that terminates away from foundation
Image:

Wrong – The below-grade concrete walls do not have any damp-proof coating

Wrong – The below-grade concrete walls do not have any damp-proof coating
Image:

Wrong – The building felt is not installed on the entire house

Wrong – The building felt is not installed on the entire house
Image:

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds

Wrong – The clips holding these metal roofing panels were set too far from the roof eave (above red line) and the panels lifted in strong winds
Image:

Wrong – The corners are not properly flashed, leaving a vulnerable area in the drainage system

Wrong – The corners are not properly flashed, leaving a vulnerable area in the drainage system
Image:

Wrong – The downspout terminates too close to the foundation of the house

Wrong – The downspout terminates too close to the foundation of the house
Image:

Wrong – The drain tile is cut and now does not extend around the entire foundation footing

Wrong – The drain tile is cut and now does not extend around the entire foundation footing
Image:

Wrong – The drain tile is not installed to terminate properly and will not transport water to the exterior

Wrong – The drain tile is not installed to terminate properly and will not transport water to the exterior
Image:

Wrong – The drain tile is not wrapped in fabric and could become clogged with debris

Wrong – The drain tile is not wrapped in fabric and could become clogged with debris
Image:

Wrong – The final grade does not slope away from the house

Wrong – The final grade does not slope away from the house