Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 313 - 329 of 329 results:

Image:

Wrong - House wrap is not fully attached to sheathing.

Wrong - House wrap is not fully attached to sheathing.
Image:

Wrong - Lack of a weather-resistant barrier allowed water to get behind the siding and rot the framing in this corner rim joist area.

Wrong - Lack of a weather-resistant barrier allowed water to get behind the siding and rot the framing in this corner rim joist area.
Image:

Wrong - Reflective housewrap not installed properly

Wrong - Reflective housewrap not installed properly
Image:

Wrong - Roof deck sheathing nails missed the trusses, potentially weakening the roof in high winds.

Wrong - Roof deck sheathing nails missed the trusses, potentially weakening the roof in high winds.
Image:

Wrong - Sheathing was poorly cut and does not align at corners.

Wrong - Sheathing was poorly cut and does not align at corners.
Image:

Wrong - Siding is missing or broken and wood crawl space wall is unprotected.

Wrong - Siding is missing or broken and wood crawl space wall is unprotected.
Image:

Wrong - This tile roof was damaged by high winds.

Wrong - This tile roof was damaged by high winds.
Image:

Wrong – A visible gap in the insulated sheathing introduces unwanted outside air, creating a thermal bypass and encouraging convective air flow

Wrong – A visible gap in the insulated sheathing introduces unwanted outside air, creating a thermal bypass and encouraging convective air flow
Image:

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.

Wrong – Either this tape was not pressed down firmly or the surface was wet or dirty so the tape is not sticking properly even during construction.
Image:

Wrong – Holes in the OSB are not patched.

Wrong – Holes in the OSB are not patched.
Image:

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.

Wrong – If the insulated sheathing will serve as an air barrier and drainage plane, any cuts and seams must be taped or sealed.
Image:

Wrong – Insulated sheathing seams should align with framing members

Wrong – Insulated sheathing seams should align with framing members
Image:

Wrong – Rigid insulation is being installed without cap nails

Wrong – Rigid insulation is being installed without cap nails
Image:

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.

Wrong – The flashing of the roof-wall juncture was installed above the roof shingles instead of below the roof shingles; also no kickout flashing was installed.
Image:

Wrong – When insulated sheathing is installed correctly, you should not see daylight. Nail holes were also left unplugged.

Wrong – When insulated sheathing is installed correctly, you should not see daylight. Nail holes were also left unplugged.
Image:

Wrong – Wiring holes in OSB were cut much larger than needed.

Wrong – Wiring holes in OSB were cut much larger than needed.
Image:

Z flashing is installed behind the rigid foam and metal lathe that goes behind the stucco siding to protect the transition between the wall sheathing and the exterior foundation insulation.

Z flashing is installed behind the rigid foam and metal lathe that goes behind the stucco siding to protect the transition between the wall sheathing and the exterior foundation insulation.