Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 385 - 408 of 554 results:

Image:

Right – Retrofit Specification for installing roof sheathing an 18-inch gable end overhang

Right – Retrofit Specification for installing roof sheathing an 18-inch gable end overhang
Image:

Right – Spray foam insulation is sprayed on the underside of the roof deck to provide a conditioned space in this low attic for the HVAC ducts.

Right – Spray foam insulation is sprayed on the underside of the roof deck to provide a conditioned space in this low attic for the HVAC ducts.
Image:

Right – Subfloors are installed in a clean, dry, well-lit factory setting for these modular, factory-built homes.

Right – Subfloors are installed in a clean, dry, well-lit factory setting for these modular, factory-built homes.
Image:

Right – The walls of this home were constructed with “insulated studs” fashioned on site by adding 2-inch-thick strips of rigid foam to the inside face of 2x4 studs then topping that with a plywood nailing surface.

Right – The walls of this home were constructed with “insulated studs” fashioned on site by adding 2-inch-thick strips of rigid foam to the inside face of 2x4 studs then topping that with a plywood nailing surface. The rigid foam provides a thermal break for each stud and provides more room for blown in insulation.
Image:

Right – This attic knee wall and the floor joist cavity openings beneath it are being sealed and insulated with spray foam.

Right – This attic knee wall and the floor joist cavity openings beneath it are being sealed and insulated with spray foam.
Image:

Right – This home’s above-grade walls are constructed in a factory where wall panels of 2x6 studs are assembled and sheathed with a coated OSB product, then windows are installed and flashed before shipping the panels to the site for assembly by crane.

Right – This home’s above-grade walls are constructed in a factory where wall panels of 2x6 studs are assembled and sheathed with a coated OSB product, then windows are installed and flashed before shipping the panels to the site for assembly by crane.
Image:

Right – Walls, windows, and wiring are installed in the factory for these modular homes, which are installed at the site on basement foundations made of insulated concrete wall panels.

Right – Walls, windows, and wiring are installed in the factory for these modular homes, which are installed at the site on basement foundations made of insulated concrete wall panels.
Image:

Right – Windows are installed and flashed in the factory for these modular homes.

Right – Windows are installed and flashed in the factory for these modular homes.
Image:

Right-- IR photo shows how effectively spray foam insulated/air sealed attic kneewall and the floor cavities under kneewall

Right-- IR photo shows how effectively spray foam insulated/air sealed attic kneewall and the floor cavities under kneewall
Image:

Right--The polyethylene ground cover for this insulated crawlspace is taped at seams and around posts before the insulation and slab are installed.

Right--The polyethylene ground cover for this insulated crawlspace is taped at seams and around posts before the insulation and slab are installed.
Image:

Right: Flashing the butt joints in lap siding installations is a better practice than relying on caulk to seal the joints.

Right: Flashing the butt joints in lap siding installations is a better practice than relying on caulk to seal the joints.
Image:

Right: Maintenance valves are installed at the inlet and outlet of this central heat pump water heater

Right: Maintenance valves are installed at the inlet and outlet of this central heat pump water heater
Image:

Right: This heat pump water heater is in a basement within the thermal boundary but not actively conditioned. It has over 770 ft² of space with easy access to the control panel and clearance for airflow to the air intake (top) and exhaust (side)

Right: This heat pump water heater is in a basement within the thermal boundary but not actively conditioned. It has over 770 ft² of space with easy access to the control panel and clearance for airflow to the air intake (top) and exhaust (side)
Image:

Right: This heat pump water heater is installed in a small space so the, intake air is ducted from an adjacent room; the water heater since on a pad of foam insulation and has a good drain line configuration but the waterpipes lack insulation

Right: This heat pump water heater is installed in a small space so the, intake air is ducted from an adjacent room; the water heater since on a pad of foam insulation and has a good drain line configuration but the waterpipes lack insulation
Image:

Right: This heat pump water heater is installed in a utility closet where it can use heat from the clothes washer and heat pump clothes dryer and has access to a floor drain for condensate

Right: This heat pump water heater is installed in a utility closet where it can use heat from the clothes washer and heat pump clothes dryer and has access to a floor drain for condensate
Video:

Rigid Foam Board Interior Insulation for Existing Foundation Walls

Image:

Rigid foam forms an insulating bond break between the foundation wall and the slab

Rigid foam forms an insulating bond break between the foundation wall and the slab
Image:

Rigid foam insulating sheathing installed over an existing garage ceiling with retrofits to air seal exterior wall before adding exterior wall insulating sheathing

Rigid foam insulating sheathing installed over an existing garage ceiling with retrofits to air seal exterior wall before adding exterior wall insulating sheathing
Image:

Rigid foam insulating sheathing is installed on existing garage ceiling and covered with a new gypsum board fire protection layer installed over the foam.

Rigid foam insulating sheathing is installed on existing garage ceiling and covered with a new gypsum board fire protection layer installed over the foam.
Image:

Rigid foam insulation and a thin slab were installed over the dirt and gravel of this sealed crawlspace

Rigid foam insulation and a thin slab were installed over the dirt and gravel of this sealed crawlspace
Image:

Rigid foam insulation is installed on the garage side of the shared garage wall and roof of an existing home

Rigid foam insulation is installed on the garage side of the shared garage wall and roof of an existing home
Image:

Rigid insulation and water control layers are installed on the exterior of a flat foundation wall; spray foam insulates the rim joist

Rigid insulation and water control layers are installed on the exterior of a flat foundation wall; spray foam insulates the rim joist
Image:

Rigid insulation is installed on the exterior side of the flat foundation wall

Rigid insulation is installed on the exterior side of the flat foundation wall
Image:

Roof supports for the awning that will cover the heat pump compressor are anchored through the siding into studs with long screws.

Roof supports for the awning that will cover the heat pump compressor are anchored through the siding into studs with long screws.