Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 361 - 384 of 744 results:

Image:

RESNET Grade I installation of spray foam insulation

RESNET Grade I installation of spray foam insulation
Image:

Right - A termite shield and a sill gasket are installed between the sill plate and the foundation on a raised slab foundation.

Right - A termite shield and a sill gasket are installed between the sill plate and the foundation on a raised slab foundation.
Image:

Right - Air barrier is present and installed between the floor system and unconditioned space.

Right - Air barrier is present and installed between the floor system and unconditioned space.
Image:

Right - Air barrier is present between garage and conditioned space.

Right - Air barrier is present between garage and conditioned space.
Image:

Right - Air barrier is present between the dropped ceiling/soffit and the attic.

Right - Air barrier is present between the dropped ceiling/soffit and the attic.
Image:

Right - Air barrier is present between the dropped ceiling/soffit and the attic.

Right - Air barrier is present between the dropped ceiling/soffit and the attic.
Image:

Right - Air barrier is present between the garage and floor system.

Right - Air barrier is present between the garage and floor system.
Image:

Right - Batt was properly split around wires to achieve RESNET Grade I

Right - Batt was properly split around wires to achieve RESNET Grade I
Image:

Right - Continuous wall sheathing and blocking has been installed to brace the raised heel trusses.

Right - Continuous wall sheathing and blocking has been installed to brace the raised heel trusses.
Image:

Right - Fiberglass/mineral wool insulation thermally isolates the garage from the interior occupied space above.

Right - Fiberglass/mineral wool insulation thermally isolates the garage from the interior occupied space above.
Image:

Right - Foam gasket installed beneath sill plate

Right - Foam gasket installed beneath sill plate
Image:

Right - Furring strips were installed with blocking to allow adequate room for 4 inches of mineral wool.

Right - Furring strips were installed with blocking to allow adequate room for 4 inches of mineral wool.
Image:

Right - Gasket installed at marriage wall connection prior to assembling modules

Right - Gasket installed at marriage wall connection prior to assembling modules
Image:

Right - Hole drilled to verify sealant is present - Hole will be sealed after verification

Right - Hole drilled to verify sealant is present - Hole will be sealed after verification
Image:

Right - Manometers are placed away from the indoor side of the fan during blower door testing

Right - Manometers are placed away from the indoor side of the fan during blower door testing
Image:

Right - Mineral Wool insulation is installed on the exterior of wall with furring strips.

Right - Mineral Wool insulation is installed on the exterior of wall with furring strips.
Image:

Right - New flashing has been installed to complete the air and water control layers at the window openings of this wall retrofit that includes insulating the wall cavities with spray foam

Right - New flashing has been installed to complete the air and water control layers at the window openings of this wall retrofit that includes insulating the wall cavities with spray foam
Image:

Right - Penetrations through the band joist are properly air-sealed.

Right - Penetrations through the band joist are properly air-sealed.
Image:

Right - Rigid foam slab edge insulation is installed along the exterior edge of a monolithic slab foundation.

Right - Rigid foam slab edge insulation is installed along the exterior edge of a monolithic slab foundation.
Image:

Right - Seal the sill plate to the rim joist with caulk.

Right - Seal the sill plate to the rim joist with caulk.
Image:

Right - Stainless steel screws, which are less conductive than other types of steel, are used to attach the “double” hat channels that hold the exterior insulation in place behind the cladding on this multistory multifamily building

Right - Stainless steel screws, which are less conductive than other types of steel, are used to attach the “double” hat channels that hold the exterior insulation in place behind the cladding on this multistory multifamily building
Image:

Right - Sub-floor insulation is properly installed and supported.

Right - Sub-floor insulation is properly installed and supported.
Image:

Right - The service penetrations through the structural slab in this garage plenum are air sealed.

Right - The service penetrations through the structural slab in this garage plenum are air sealed.
Image:

Right - This ceiling-mounted mini whole-house fan has built-in insulated covers to reduce heat loss when the fan is not in use

Right - This ceiling-mounted mini whole-house fan has built-in insulated covers to reduce heat loss when the fan is not in use