Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 217 - 240 of 634 results:

Image:

Inadequate amount of insulation installed with compression, misalignment, and voids

Inadequate amount of insulation installed with compression, misalignment, and voids
Image:

Insert an electric leaf blower into the dryer exhaust duct and turn on at lowest setting to blow out the duct

Insert an electric leaf blower into the dryer exhaust duct and turn on at lowest setting to blow out the duct
Image:

Install bottom layer of rigid insulation

Install bottom layer of rigid insulation
Image:

Install duct supports in line with ceiling trusses

Install duct supports in line with ceiling trusses
Image:

Install ducts without excessive coils or loops

Install ducts without excessive coils or loops
Image:

Install ducts without kinks or sharp bends

Install ducts without kinks or sharp bends
Image:

Install sheet metal to cover the gaps around a flue pipe in the attic; attach with screws or heavy staples, then seal seams with fire-rated caulk or foam

. Install sheet metal to cover the gaps around a flue pipe in the attic; attach with screws or heavy staples, then seal seams with fire-rated caulk or foam
Image:

Install supply registers in floors or ceilings to avoid routing ducts through exterior walls

Install supply registers in floors or ceilings to avoid routing ducts through exterior walls
Image:

Install supports every 5 feet so that maximum allowable sag in flexible duct is no more than one-half inch per foot

Install supports every 5 feet so that maximum allowable sag in flexible duct is no more than one-half inch per foot
Image:

Install supports every 5 feet so that maximum allowable sag in flexible duct is no more than one-half inch per foot

Install supports every 5 feet so that maximum allowable sag in flexible duct is no more than one-half inch per foot
Image:

Install wood framing cross pieces in the attic rafter bays on each side of the duct chase

Install wood framing cross pieces in the attic rafter bays on each side of the duct chase
CAD File:

Insulated cantilever floor - cavity insulation with 1 1/2 inch rigid insulation closure

Preview Image
Insulated cantilever floor - cavity insulation with 1 1/2 inch rigid insulation closure
CAD File:

Insulated cantilever floor - cavity insulation with 1 inch rigid insulation closure

Preview Image
Insulated cantilever floor - cavity insulation with 1 inch rigid insulation closure
CAD File:

Insulated floor above garage - cavity insulation with 1 inch rigid insulation with 2x2 wood furring

Preview Image
Insulated floor above garage - cavity insulation with 1 inch rigid insulation with 2x2 wood furring
Image:

Insulation does not cover boot and is not sealed

Insulation does not cover boot and is not sealed
Image:

Insulation does not cover boot and is not sealed

Insulation does not cover boot and is not sealed
Image:

Insulation does not cover boot and is not sealed

Insulation does not cover boot and is not sealed
Image:

Insulation for rigid ducts comes in large rolls like this 4-ft x 50-ft roll consisting of a Foil-Scrim-Kraft (FSK) vapor barrier attached to the fiberglass insulation.

Insulation for rigid ducts comes in large rolls like this 4-ft x 50-ft roll consisting of a Foil-Scrim-Kraft (FSK) vapor barrier attached to the fiberglass insulation.
Image:

Jump ducts are installed in the ceiling to connect closed rooms with open space to provide a return air path and balance air pressure

Jump ducts are installed in the ceiling to connect closed rooms with open space to provide a return air path and balance air pressure
Image:

Lay out duct so that no radius of a bend or turn is less than the diameter of the airway

Lay out duct so that no radius of a bend or turn is less than the diameter of the airway
Image:

Louvers and jump ducts allow cross ventilation through rooms with closed doors

Louvers and jump ducts allow cross ventilation through rooms with closed doors
Image:

Manual D details show duct size and chase path

Manual D details show duct size and chase path
Image:

Manually seal around ceiling registers with foil tape

Manually seal around ceiling registers with foil tape
Image:

Manually seal around ceiling registers with mastic

Manually seal around ceiling registers with mastic