Newport Ventures will evaluate the potential to make metal buildings more energy efficient by researching the market for a high R-value vacuum insulation product adhered to metal wall or roof panels. Newport Ventures, NanoPore (a MAI manufacturer),and Oak Ridge National Laboratory will investigate promising applications and possible manufacturers identified by the Metal Buildings Manufacturer Association (MBMA) and other relevant industry associations across NYS. Research will be conducted with respect to the optimum profile of the metal panel, method and material for adhesion, edge and seam detailing, fastening method, and trim pieces.
Disclaimer
This content is a work created with funding provided by the United States Department of Energy under Contract no DE-AC05-076RL01830 for the operation of Pacific Northwest National Laboratory. The information and guidance provided by Pacific Northwest National Laboratory (PNNL) in the content are intended solely for educational purposes only and do not constitute formal training or certification. It is provided with the explicit understanding that neither the United States Government nor the United States Department of Energy, nor the Contractor, nor any or their employees, nor any jurisdiction or organization that has cooperated in the development of these materials, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness or any information, apparatus, product, software, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Viewers assumes full responsibility for all actions that they may take from information provided in this content including ensuring the safety, code compliance, and proper functionality of any products they choose to install. Installation and use of such products should be performed in accordance with local regulations and manufacturer instructions.