Library

Bill requiring the Consumer Product Safety Commission to revise the safety standards for freestanding clothing storage units such as a dressers, bureaus, or chests of drawers to include testing related to tip overs and new warning requirements for all such products entering the U.S. market; passed...

Document providing information on correct storage techniques for lumber to manage moisture.

A website providing timely and accurate forecasts and watches for severe thunderstorms and tornadoes over the contiguous United States.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

ENERGY STAR webpage describing the benefits of storm windows and a link to a product list.

Webpage providing an ENERGY STAR climate zone map and criteria for ENERGY STAR storm windows per climate zone.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Paper describing landscaping influences on heat gain through shading, infiltration shielding, and microclimate creation for nearby buildings.

Report recommending strategies and approaches that the Federal government and other stakeholders may take to encourage and aid States and local communities in the adoption of the most current building codes.

Article describing three ways to strengthen the roof-to-wall connections in an existing home.

Article defining structural design loads and ways to calculate them, including dead loads, live loads, soil lateral loads, wind loads, snow loads, earthquake loads, and other loads.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Information sheet describing correct application of stucco.

Discussion of building sheathing.

Paper describing case studies on urban vegetation and greenways and their impacts on city climate and building performance.

A report describing methods for constructing homes and treating soils to reduce the risk of termites in buildings.

Recovery advisory presenting key wind retrofit guidelines for buildings located in hurricane-prone regions. These retrofit guidelines are intended to help building owners and designers prevent or limit wind damage and water infiltration during high-wind events.

Article describing suggested food supplies, sanitation, safety, and cooking for during and after an emergency.

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

Fact sheet describing recommendations for exceeding NFIP regulatory requirements for new construction and for repairs, remodeling, and additions, including building foundations, enclosures below the Base Flood Elevation (BFE), use of nonstructural fill, use of space below the BFE, utilities...

Article providing fundamental information and recommendations for shading windows for energy savings.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Question and Answer article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

Web page providing information about water use in pools and spas and tips for how to increase water efficiency.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Report presenting safe room designs and showing the homeowner and builder/contractor or local design professional how to construct a safe room for a home or small business.

Information for properly sizing gas lines for use with tankless water heaters and other gas appliances.

Presentation on urban land use and sustainable building design.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Resource manual for builders, designers, architects, plumbers, and others interested in the WaterSense Labeled Homes Program providing an overview of the program, explains how to meet the program requirements, gives descriptions of water-saving technologies, and provides links to further resources.

Standard covering minimum required health and safety diagnostics and specifications for BPI's Building Analyst Professional certification.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Report providing a selected compilation of seismic rehabilitation techniques and guidance on which techniques are commonly used to mitigate specific seismic deficiencies in various model building types.

Brochure describing insulation approaches for homes with slab-on-grade floors.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Fact sheet describing water management in a residential building.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

A story about bees building a hive in the drainage plane behind the brick veneer siding. The bees entered the wall through unprotected drainage holes.

Research study exploring retrofit procedures and simulated post-occupancy data for three homes in an effort to determine the effectiveness of retrofit packages.

Image depicting damage from termites in weatherboard cladding.

Article describing identification of termite infestations in homes and treatment options.

An introduction to the insect termites.

Document with information on preventing termites when using ICFs.

FSEC certification and testing page for solar systems.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Webpage describing the standards, seminars, exams, etc regarding testing, adjusting and balancing (TAB).