Library

Database of NFRC rated windows.

A nine-part fact sheet covering a variety of common questions surrounding wildfires and how to make a home more resilient to wildfires.

Standard/specification establishing requirements for fenestration products to be referenced by model codes.

American Lung Association web page providing information on particulate matter and indoor air quality.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Website providing guidance on passive heating, cooling, and lighting methods.

Article from Williams College on the key elements of passive solar design for homes.

Brochure describing what permeable pavement is, where to install it, and how to maintain it.

Report providing information on performance of mortars and concrete containing PCMs.

Report describing a laboratory assessment on the performance of Rheem 120-volt heat pump water heaters (HPWH), aimed at identifying optimal installation locations for these new "plug-in" models based on comprehensive testing under various conditions.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Webpage describing steps homeowners can take to prepare their home and car for winter storms.

Webpage describing steps homeowners can take to prepare their home and car for winter storms.

Webpage providing guidance for homeowners on how much snow weight a typical roof can handle and when to consider removing snow from the roof.

Pamphlet describing proper mulching around trees and problems and benefits associated with mulching.

Report providing wildfire protection guidance for homeowners in California.

Article discussing fire safety for high-rise buildings.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Article describing rammed earth construction

App developed by HUD to assist homeowners with lead paint and other hazards common to older homes.

Report describing methods for reducing the cost of electric vehicle charging infrastructure.

Website describing the U.S. Department of Energy's residential buildings program.

Report identifying efficient, connected, smart, and flexible GEB technologies and their future potential, including barriers and opportunities, recommendations for policymakers, and research needs.

A student manual for containing information on residential sprinkler systems.

Resource that differentiates products in the marketplace that meet WaterSense requirements.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

Web page providing an overview of room-level air conditioning systems such as window units and mini-splits.

Document serving as a resource to assist decision-makers in understanding how networked lighting control system attributes can satisfy project objectives at an appropriate cost and functionality

Website tool that can search for trees by name or characteristics and retrieve data describing tree attributes including site preferences and general characteristics and considerations.

Web page describing the basics of how to size and build a battery bank for electricity storage.

SEIA resources page.

Webpage describing the basics of solar plus storage operations on homes.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the current version of the standard, published in the year 2019...

A specification covering the application of Insulating Concrete Forms (ICFs) that act as permanent formwork for cast-in-place reinforced concrete beams & walls which was published in the year 2022 and is available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

ENERGY STAR webpage describing the benefits of storm windows and a link to a product list.

Webpage providing an ENERGY STAR climate zone map and criteria for ENERGY STAR storm windows per climate zone.

Recovery advisory presenting key wind retrofit guidelines for buildings located in hurricane-prone regions. These retrofit guidelines are intended to help building owners and designers prevent or limit wind damage and water infiltration during high-wind events.

Article describing suggested food supplies, sanitation, safety, and cooking for during and after an emergency.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Fact sheet providing the wind resistant provisions of the 2015 International Residential Code.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.