Library

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Website providing an introduction to the concepts and principles of seismic design.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Webpage describing the basics of solar plus storage operations on homes.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Guide providing guidance on conducting seismic risk assessments for buildings. The link goes to the current version of this standard, which was published in the year 2016 and is available for preview and purchase. Previous editions of this standard were published in the year 2016, 2007, and 1999...

Standard covering the installation of fenestration products in new and existing construction which was published in the year 2007, and is available for preview and purchase at the referenced link.

Practice providing a guide or standard to undertake seismic risk assessment of properties. The current version of the standard was published in the year 2016 and is available for preview and purchase at the link. Previous versions of the standard were published in the years 2016 and 2007, and are...

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the current version of the standard, published in the year 2019...

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Recovery advisory presenting key wind retrofit guidelines for buildings located in hurricane-prone regions. These retrofit guidelines are intended to help building owners and designers prevent or limit wind damage and water infiltration during high-wind events.

Article providing fundamental information and recommendations for shading windows for energy savings.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Web page providing information about water use in pools and spas and tips for how to increase water efficiency.

Fact sheet providing the wind resistant provisions of the 2015 International Residential Code.

Document describing the impacts of tree cover on property values.

Report illustrating CAD drawings and modeling of bracing layouts for a gable roof truss.

Report describing seismic retrofit of historical buildings.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Training course describing how to incorporate trees into an energy-conserving landscape.

A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

Information sheet with the Waste Reduction Model (WARM), designed to help solid waste planners and organizations track and voluntarily report greenhouse gas (GHG) emissions reductions from several different waste management practices.

Web-based manual providing guidance for removal and preventing entry of nuisance wildlife.

Report describing results of a workshop assessing current and future strategies for research into disaster resilience and energy efficiency in buildings.