Library

Practice providing a guide or standard to undertake seismic risk assessment of properties. The current version of the standard was published in the year 2016 and is available for preview and purchase at the link. Previous versions of the standard were published in the years 2016 and 2007, and are...

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Report covering coating and back venting wood based claddings and trim.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Paper describing case studies on urban vegetation and greenways and their impacts on city climate and building performance.

Article providing fundamental information and recommendations for shading windows for energy savings.

Web page providing information about water use in pools and spas and tips for how to increase water efficiency.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Document with information on preventing termites when using ICFs.

Document describing the impacts of tree cover on property values.

Report describing seismic retrofit of historical buildings.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Report documenting the process and outcomes involved in achieving the U.S. Department of Energy Zero Energy Ready Home (ZERH) program certification standards while helping homebuilders in Climate Zones 5 and 6 in the Upper Midwest achieve ZERH certification.

Report covering the migration of wind-blown embers in roof vents.

A presentation about the need for rainscreens including the damage water and moisture ingress into a home’s siding and framing can cause, and ways to design a resilient wall that drains and ventilates well.

Fact sheet describing how to identify heat-related illness and what actions to take.

Information sheet with the Waste Reduction Model (WARM), designed to help solid waste planners and organizations track and voluntarily report greenhouse gas (GHG) emissions reductions from several different waste management practices.

Resource that provides guidance when choosing products that meet WaterSense program requirements.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.