Library

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2009 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2015 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

Document describing portions of the flood provisions from the 2018 editions of the IBC, IRC, IEBC, IMC, IPC, IFGC, IFC, ISPSC, IPSDC, and ICC Performance Code.

2020 energy efficiency code for the state of Florida.

Residential building code for the State of Florida.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

A presentation on the 2020 State Mechanical Code for easier understanding.

Document presenting the minimum recommended requirements necessary for the design and construction of new buildings and other structures to resist earthquake ground motions throughout the United States.

Document containing a series of resource papers that describe earthquake design components, including shear walls, resiliency, ground motion, and story drift and deflection, among others.

Federal statistics about national energy consumption in residential homes in 2020

Web article showing examples of various architectural methods for shading windows.

Article from the Sierra Club explaining 5 steps to take to ensure your home's resistance to wildfires, including site maintenance and roof construction guidelines.

Article describing seven reasons to mulch gardens.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Guide for homeowners describing how to find and seal basement and attic air leaks, determine if attic insulation is adequate, make improvements safely, and reduce energy bills.

A brochure educating homeowners on how to protect their home during seismic events.

Paper describing a proposed method for quantifying tree and vegetation evapotranspiration effects on city climate

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard outlining materials and installation methods for a liquid-applied vapor permeable air barrier systems located in the non-accessible part of the wall.

Vinyl siding estimating and installation guide for vinyl siding products.

Website article describing pros and cons of DC and AC batteries and explaining that AC batteries are less expensive than DC batteries.

Webpage of ACCA’s Quality Standards outlining precisely the procedures that contractors should follow when designing, installing, maintaining, repairing, and verifying indoor environment systems.

Radiant, hydronics, geothermal -- they are a vital part of modern comfort and energy solutions. ACCA helps hydronics contractors operate at peak performance.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Acceptance criteria providing guidelines for demonstrating compliance with codes referenced in the criteria related to barriers to water migration in thin-set installations of ceramic tile and stone flooring and shower sub-pan linings.

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Report providing guidance to homeowners and business owners on protecting crawlspaces from flood damage.

Article describing how to detail head flashing above a window.

Report on the design and evaluation of extended plate and beam.

Technical report describing the research behind a new aerosol-based sealing method, utilizing pressurization and a dispersed sealant fog, facilitated by a standard blower door, to automatically measure, locate, and seal air leaks in new homes in the United States, providing an efficient solution to...

Website providing research, efficiency and safety standards development, and advocacy to the home appliance industry to bring efficient, high-performing home appliances to consumers.

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Document providing step-by-step guidance to sizing air-source heat pumps for a cold climate.

Alliance for Water Efficiency website homepage.

American Cleaning Institute website homepage.

Standard detailing the specific requirements for all face, back, and inner ply grades as well as formaldehyde emissions, moisture content, tolerances, sanding, and grade marking which was published in 2020, can be acquired through a subscription with the ANSI webstore.