Library

Blog post about heat pump clothes dryers.

Guidance from EPA, FEMA, HUD, and NIH on how to deal with asbestos in homes following natural disasters.

Homeowner guidance from CDC, EPA, FEMA, HUD, and NIH on how to safely clean up mold issues following flooding from a natural disaster.

Guidance from EPA, FEMA, HUD, and NIH on homeowner safety dealing with lead contaminants.

Homeowner guidance from EPA, FEMA, HUD, and NIH on dealing with radon following a natural disaster.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Publication specifying HVI’s prescriptive procedures for testing and rating airflow of residential ventilation products in accordance with ANSI consensus standards.

This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Report on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Guidance from EPA, HUD, NIH, and OSHA on worker and employer interactions with lead contaminants.

Siding installation guide for Ply Gem Siding Group products.

Worker guidance from EPA, HUD, NIH, and OSHA on how to deal with mold in homes following natural disasters.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Standard containing requirements for carbon monoxide (CO) detection and warning equipment intended to protect lives by warning occupants of the presence of CO in sufficient time to allow occupants to escape or take other appropriate action.

Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.

U.S. Department of Energy's website describing radiant barriers in homes.

Worker guidance from EPA, HUD, NIH, and OSHA for radon issues following a natural disaster.

Report showing how to identify, inventory, and screen buildings that are potentially hazardous because of seismic hazards.

Report providing strategies to support occupant behavior changes for enhancing resilience, and to reduce a building's vulnerability to extreme weather, climate change, and loss of power.

Guide addressing immediate responses for cleaning up after natural disasters, including a list of construction retrofit guidance for natural disasters.

Guide discussing ways that homeowners in ground-secured houses can reduce the risks and damage caused by floods upon residential buildings.

Webpage from FEMA describing how to properly reconstruct masonry fireplace chimneys damages by earthquakes.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

A fact sheet educating homeowners on the importance of residential safe rooms, including their cost and how to register a safe room with local officials.

Newsletter containing five articles focused on seismic retrofitting.

Technical report providing site selection guidance for installation of small wind turbines.

Toolkits for residents and owner/managers who live and work in federally assisted housing.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2011 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2021, 2015, 2006, and...

Report recommending strategies and approaches that the Federal government and other stakeholders may take to encourage and aid States and local communities in the adoption of the most current building codes.

Presentation on urban land use and sustainable building design.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Guide providing information on controlling attic ductwork sweating.

Report providing design guidance for wood-framed residential construction in high wind areas where design wind velocity requirements do not exceed 140 miles per hour.

Report describing the best practices that were observed during installations of electric vehicle chargers for residential homes.

Webpage documenting a recall of a window shade product.

Webpage describing burn bans, which wood burning devices are legal in Washington, why wood smoke is harmful to health, and how to reduce the smoke from your wood burning device.