Library

Website describing Minnesota Power’s New Construction Energy Efficiency program that promotes building practices and technologies that enhance new residential construction.

Practical guide describing the management of moisture during a building's design, construction and maintenance.

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Worker guidance from EPA, HUD, NIH, and OSHA on how to deal with mold in homes following natural disasters.

Report on a study monitoring moisture conditions of double-stud wall assemblies with different insulation in Devens, Massachusetts.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

An article about double-hung windows.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

Standard containing requirements for carbon monoxide (CO) detection and warning equipment intended to protect lives by warning occupants of the presence of CO in sufficient time to allow occupants to escape or take other appropriate action.

Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Website from the EPA containing information for homeowners and renters about how to identify asbestos in the home and how to deal with it to reduce exposure to it.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.

U.S. Department of Energy's website describing radiant barriers in homes.

Worker guidance from EPA, HUD, NIH, and OSHA for radon issues following a natural disaster.

Report showing how to identify, inventory, and screen buildings that are potentially hazardous because of seismic hazards.

Report providing strategies to support occupant behavior changes for enhancing resilience, and to reduce a building's vulnerability to extreme weather, climate change, and loss of power.

Guide addressing immediate responses for cleaning up after natural disasters, including a list of construction retrofit guidance for natural disasters.

Guide discussing ways that homeowners in ground-secured houses can reduce the risks and damage caused by floods upon residential buildings.

Webpage from FEMA describing how to properly reconstruct masonry fireplace chimneys damages by earthquakes.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

A fact sheet educating homeowners on the importance of residential safe rooms, including their cost and how to register a safe room with local officials.

Report on air-sealing programs for energy-efficiency retrofits.

Article explaining the energy cost reduction and other benefits associated with installing a heat pump clothes dryer

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Newsletter containing five articles focused on seismic retrofitting.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

Technical report providing site selection guidance for installation of small wind turbines.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.

Toolkits for residents and owner/managers who live and work in federally assisted housing.

Webpage providing information about design snow loads and a free interactive ground snow load mapping tool for the contiguous United States, as well as snow load calculation methods.

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2011 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2021, 2015, 2006, and...

The Standard Work Specifications (SWS) are a tool for industry guidance to ensure effective, durable, and safe work is performed during home upgrades.

Webpage providing information how to deal with rodents by knowing what they look like, where they live, and what they do.

Report recommending strategies and approaches that the Federal government and other stakeholders may take to encourage and aid States and local communities in the adoption of the most current building codes.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Presentation on urban land use and sustainable building design.

This guide and workbook offers practitioners with the knowledge to properly implement the measurement and documentation procedures required in the ANSI/ACCA 5.

This TechNote provides an overview of building code requirements and best practices for flashing at window and door frames.

Conference proceedings from the 2018 ACEEE Summer Study on Energy Efficiency in Buildings that highlights efforts to expand energy efficiency adoption, address barriers across market sectors, and introduce a new focus on energy equity for underserved communities.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

Article describing tips for effectively installing weatherstripping on windows and doors.