Library

Fact sheet poster describing how to add exterior, continuous, rigid insulation to the exterior walls when replacing siding on an existing home.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Report on adding insulation to load-bearing mass masonry buildings.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Report presenting the building america research to market plan.

Document presenting some of the key technical properties of many of the most common building materials.

Design guide providing solutions and tools for designing central heat pump water heater systems in multifamily and other commercial buildings.

Case study about the grid integration of electrical vehicle supply equipment.

Article describing correct ways to attach rigid insulation to the exterior of commercial and residential buildings.

Report on improving passive design adoption rates.

Report on a simplified test procedure for combustion safety that is easier to implement and should produce fewer false positives than the previous procedure.

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Fact sheet poster describing benefits and qualification of U.S. Department of Energy (DOE) certified Zero Energy Ready Homes and providing eight examples of certified homes.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Fact sheet poster describing the certification of window attachment products such as storm windows, roller shades, cellular shade, and solar screens by the Attachment Energy Rating Council (AERC).

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report on field monitoring of inverter-driven ASHPs in cold-climate homes.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report assessing slab-on-grade foundation insulation energy savings.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

Report examining the impacts that common installation practices and age- induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE.

Report on the long-term performance of mini-split heat pumps.

Report on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation and living space floor assembly at fifteen home.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Report on two approaches to retrofitting existing double-stud walls.

Report describing a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior.

Report describing wall assemblies that use layers of rigid exterior insulation thicker than 1-½ inch and require a secondary cladding attachment location exterior to the insulation.

Report describing the use of mineral fiber insulating sheathing in a high performance enclosure retrofit package.

Report on a study monitoring moisture conditions of double-stud wall assemblies with different insulation in Devens, Massachusetts.

Technical report describing research aimed to provide window manufacturers with foundational guidance for installing windows in walls with continuous insulation (CI), addressing critical aspects such as evaluating common installation methods, establishing acceptance criteria for window performance...

Report describing the key findings from the first third-party field validation of 120-volt heat pump water heater (HPWH) technology, addressing the significant barriers to their adoption and emphasizing their potential role in reducing carbon emissions from residential water heating.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Report on air-sealing programs for energy-efficiency retrofits.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Fact sheet poster describing a series of fact sheets and checklists for homeowners to share with contractors to help achieve cost-effective, energy-efficient retrofits for dozens of common home renovation projects.