Library

Presentation explaining the fenestration elements of the Florida Building Code.

Article describing the history and the current debate about how to adjust the Florida building codes.

Animated video demonstrating the continuous load path of a hurricane on a house.

Fact sheet describing the acceptable underlayment alternatives including ASTM D6757 Underlayment Felt Containing Inorganic Fibers for Steep-Slope Roofing for certain applications.

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Factsheet describing ways to install sheathing over existing 1x roof decking.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Checklist providing information on how and when to install solid sheathing over spaced deck boards on homes located in areas that use the FORTIFIED Home™–High Wind standards.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

The FPC Monitoring project has evaluated radiant barrier systems (RBS) as a new potential DSM program.

Website describing wet floodproofing measures to prevent against structural damage, internal damage and damage to electrical components.

Standard that applies to storage water heaters, instantaneous water heaters, and circulating water heaters including booster water heaters; the current version of this standard was published in the year 2019 and it is available for purchase along with a digital preview on the ANSI webstore page.

Fact sheet defining a grid-interactive efficient building and its benefits.

Report evaluating HVAC building technologies based on their ability to provide grid services and the type of value provided, including efficiency, load shed, load shift, and modulation.

Report evaluating lighting and electronic building technologies based on their ability to provide grid services and the type of value provided, including efficiency, load shed, load shift, and modulation.

Report providing an introduction to core concepts of GEBs, and explaining how flexible building loads can be integrated and controlled to benefit consumers, the grid, and society more broadly.

Report addressing the current state of these technologies and the challenges of adapting these to the GEB context.

Report focuseing on dynamic window and opaque envelope technologies for GEBs, including electrochromic glazing, automated attachments, and thermal storage.

Website article touring areas hit hardest by tornadoes to see how they are building differently to protect against the next big twister.

Document describing living shoreline techniques for shoreline stabilization.

Report describing tsunamis and options for vertical evacuation from tsunamis; the guide addresses determination of tsunami and earthquake loads and structural design criteria and concepts, primarily for commercial buildings.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Blog post about heat pump clothes dryers.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report assessing slab-on-grade foundation insulation energy savings.

Guidance from EPA, FEMA, HUD, and NIH on how to deal with asbestos in homes following natural disasters.

Homeowner guidance from CDC, EPA, FEMA, HUD, and NIH on how to safely clean up mold issues following flooding from a natural disaster.

Guidance from EPA, FEMA, HUD, and NIH on homeowner safety dealing with lead contaminants.

Homeowner guidance from EPA, FEMA, HUD, and NIH on dealing with radon following a natural disaster.

Article from RMI on how climate change is leading to an increase in critical extreme heat hours and what smart building strategies can be taken to mitigate some of these effects including paint color and insulation.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Factsheet describing proper methods for installing vinyl siding and soffit coverings in high wind and coastal areas.

Publication specifying HVI’s prescriptive procedures for testing and rating airflow of residential ventilation products in accordance with ANSI consensus standards.

Report on on lessons learned from building one multifamily home to the Zero Energy Ready Home program requirements.

Report examining the impacts that common installation practices and age- induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE.

This research study used pollutant measurements, home inspections, diagnostic testing and occupant surveys to assess IAQ in 24 new or deeply retrofitted homes designed to be high performance green buildings in California.

Document outlining specifications that were developed by the U.S. Environmental Protection Agency (EPA) to recognize new homes equipped with a comprehensive set of indoor air quality (IAQ) features.

A factsheet providing information on how to prevent pests from entering the home by sealing cracks and openings.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Article describing methods for designing and constructing multifamily buildings with insulating concrete forms (ICFs).