Library

Manual assisting architects, engineers, owners and roofing contractors for designing, specifying and installing roof tiles in areas of snow and ice.

Installation manual outlining proper installation practices, industry standards and the code requirements of roofing tiles.

Article describing construction best practices to help reduce the wind-induced pressure loads on a low-rise building during a hurricane.

Brochure helping homeowners identify hazards, work with contractors to remove the hazards, help ensure the work is done properly, and educate when they can return safely to the home.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

A fact sheet providing information on termite species and how to prevent them from entering into your home.

Report describing costs associated with non-residential electric vehicle charging, including multifamily properties.

Webpage explaining what causes the formation of ice dams on roofs and steps to take to prevent them.

Guidance document on deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Over Time, Phased Guidance chapter presents a phased approach to deep energy retrofits.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Source Energy and Carbon Decisions chapter helps users carefully assess the impacts of switching from gas to electricity for heating end-uses, using source energy and/or carbon emissions...

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Report providing information on ways to incentivize funding of hazard mitigation programs.

Checklist for the DOE Zero Energy Ready Home National Program Requirements Mandatory Requirement 7 (Renewable Ready).

Checklist describing solar water heating recommendations per the DOE Zero Energy Ready Home program.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Technical report describing a market assessment conducted on new home builders' window purchasing practices revealing insights to inform the development of thin triple-pane windows, utilizing a center pane of thin glass and krypton gas fill to achieve the performance of standard triple-pane windows...

Report covering the rainwater performance of building assemblies.

Designer checklist covering hazards involving ground and surface water, rain and water vapor, HVAC and plumbing, sunlight, insects, decay, and natural hazards, and builder checklist covering all disaster resistance, sorted by building component.

Report on how airtighness changes as houses age.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Article presenting a numerical study of wind pressure on the low-rise hip-roof building by varying the roof pitch using computational fluid dynamics computer modeling and wind tunnel testing of hip roofs with different roof pitches: 15°, 20°, 30° and 40°.

Computer simulations comparing International Journal of Advanced Structural Engineering wind pressure differences between a gable-ended roof versus a hip roof versus a pyramidal-shaped roof.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Technical report evaluating the energy savings potential of radiative cooling technologies, particularly photonic 'selective emittance' materials.

Calculator to help homeowner's calculate the size of pool pump they need.

Report describing the research gap in the connection between resilience and energy efficiency.

Report describing the methods and results of a field evaluation of the energy performance of cellular shade window coverings.

Report describing a research study of the performance of interior low-E storm windows in two test houses at Pacific Northwest National Laboratory in Richland, WA.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Technical report detailing the vulnerabilities of the U.S. electric grid to weather-related failures.

Technical report describing the impact of orientation on thermal comfort.

Newsletter reviewing federal disaster policy, the research basis for resilience, and three models of building resilient communities.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report on field monitoring of inverter-driven ASHPs in cold-climate homes.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Report presenting the results from several demonstrations of a new method for sealing building envelop air leaks.

Article defining terms and testing requirements for fire-resistant construction materials including combustible, noncombustible, fire-resistant or fire-resistance, and ignition-resistant.

Link to all versions of ASCE/SEI 24, a standard describing the minimum requirements and expected performance for the siting and design and construction of buildings and structures in flood hazard areas that are subject to building code requirements.