Library

Case study on exhaust ventilation and corresponding outdoor air intake strategies implemented in high-performance new-construction multifamily buildings.

Report detailing the effects of replacing PSC motors with more efficient, variable-speed motors.

In this report, BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low-energy, high performance, homes in a hot-humid climate.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report describing research that helps inform best practices for air-sealing multifamily buildings in the Northeast.

Article describing RESNET guidance on evaporative coolers.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Report on high-R wall design called extended plate and beam that uses foam sheathing insulation with wall framing.

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Newsletter reviewing federal disaster policy, the research basis for resilience, and three models of building resilient communities.

Guide discussing the siting of residential and community safe rooms at appropriate elevations and locations.

ICC 500 provides the minimum requirements to safeguard public health, safety, and general welfare relative to the design, construction, and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Report on field monitoring of inverter-driven ASHPs in cold-climate homes.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Report presenting the results from several demonstrations of a new method for sealing building envelop air leaks.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Link to all versions of ASCE/SEI 24, a standard describing the minimum requirements and expected performance for the siting and design and construction of buildings and structures in flood hazard areas that are subject to building code requirements.

Presentation explaining the fenestration elements of the Florida Building Code.

Website with information for consumers about solar thermal systems for homes.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Animated video demonstrating the continuous load path of a hurricane on a house.

Checklist providing information on how and when to install solid sheathing over spaced deck boards on homes located in areas that use the FORTIFIED Home™–High Wind standards.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

The FPC Monitoring project has evaluated radiant barrier systems (RBS) as a new potential DSM program.

Article describing frost-protected shallow foundations with construction drawing details.

Website describing wet floodproofing measures to prevent against structural damage, internal damage and damage to electrical components.

Website with prepopulated information about the United States renewable resources.

Website providing information about the Gossamer Wind Series Ceiling fans, conceived by Danny Parker at the Florida Solar Energy Center as a means of realizing the energy efficiency and comfort potential of ceiling fans.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Document describing living shoreline techniques for shoreline stabilization.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Blog post about heat pump clothes dryers.

Article from NREL on wall construction guidelines for homes in hot climate zones.

Report assessing slab-on-grade foundation insulation energy savings.

Guidance from EPA, FEMA, HUD, and NIH on how to deal with asbestos in homes following natural disasters.

Homeowner guidance from CDC, EPA, FEMA, HUD, and NIH on how to safely clean up mold issues following flooding from a natural disaster.

Guidance from EPA, FEMA, HUD, and NIH on homeowner safety dealing with lead contaminants.

Homeowner guidance from EPA, FEMA, HUD, and NIH on dealing with radon following a natural disaster.

Report describing for homeowners how to protect their homes from flooding, 3rd Edition.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Article describing the stack effect in buildings.

Companion document to the Indoor airPLUS Construction Specifications, providing guidance on identifying compliant products, including industry databases and examples of product labeling.

Standards criteria supporting ICC HVAC duct support standards.

Publication specifying HVI’s prescriptive procedures for testing and rating airflow of residential ventilation products in accordance with ANSI consensus standards.

Report summarizing the status of a central hydronic heating system project in multifamily housing at the conclusion of the 20112012 heating season.