Library

Report about cost effective energy-efficient upgrades that can be implemented in the hot, dry Southwest climate.

Report about a deep energy retrofit Cool Energy House.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Report covering non-combustible continuous exterior insulation and non-combustible roof venting.

Website providing information about how to prevent rodent entry in homes.

Infographic providing details on choosing the right advanced power strip based on your habits to reduce the electricity wasted when your electronic devices are idle.

Website providing an introduction to the concepts and principles of seismic design.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Report summarizing commissioning, short-term testing, and analysis that occurred before, during, and just after the actual retrofit of the Bay Ridge project.

Report evaluating the renovation of a 5,800-ft2, multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate.

Document about testing of seven water heating systems in the Hot Water Systems laboratory in central Florida.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

Outlines the minimum criteria for a solar water heating system installed by a Solar Water Heating Program trade ally under Energy Trust of Oregon’s Solar Water Heating Program.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Guide providing guidance on conducting seismic risk assessments for buildings. The link goes to the current version of this standard, which was published in the year 2016 and is available for preview and purchase. Previous editions of this standard were published in the year 2016, 2007, and 1999...

Standard covering the installation of fenestration products in new and existing construction which was published in the year 2007, and is available for preview and purchase at the referenced link.

Practice providing a guide or standard to undertake seismic risk assessment of properties. The current version of the standard was published in the year 2016 and is available for preview and purchase at the link. Previous versions of the standard were published in the years 2016 and 2007, and are...

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Report about results of 10 test buildings in Chicago, studied to identify best practices for methodology, typical costs, and energy savings associated with steam system balancing.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.

Document explaining the benefits of evaluating and identifying energy efficiency retrofit measures that could be made during renovation and maintenance of multifamily buildings.

Document serving as a starting point that features initial tools and resources for teams to start collaborating to continually improve the energy efficiency and durability of new houses.

Article providing fundamental information and recommendations for shading windows for energy savings.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Web page providing information about water use in pools and spas and tips for how to increase water efficiency.

Report providing performance results of a home's heat pump water heater and whole-house dehumidifier over a six-month period.

Report evaluating a test home built in Atlanta, GA in the mixed-humid climate zone. The report outlines the features of the house, discusses the implementation of the energy efficient design, and presents the results of short-term characterization testing.

A website covering the history of the lightbulb that includes a helpful timeline to illustrate lightbulb innovation from the 1800s - Present.

Document describing the impacts of tree cover on property values.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Report about seeking a 30% source energy savings targets over a comparable 2009 International Energy Conservation Code-built home in the cold climate zone, using simple measures.

Report describing seismic retrofit of historical buildings.

Article about installing balanced ventilation systems.

Webpage providing guidance on the use of thermal mass with passive heating and cooling strategies.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Report about partnership to build three communities of net zero houses.

Research study describing research underway to better understand building thermal energy modeling tools.

Website with consumer information about various types of lighting.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

Report addressing the ever increasing percentage of whole house energy use that is attributable to miscellaneous electricity loads (MELs) and major appliances.

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

Report discussing the measured variability in indoor space temperatures in a set of 60 homes located in Florida, New York, Oregon, and Washington.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2013, and is available for...

Document outlining important safety considerations of ventless fireplaces.

Research study developed and verified a fuel oil flow field measurement protocol that is cost effective and can be performed with little training for use by the BB program as well as other weatherization programs and building science researchers.

Report describing filtration, distillation, and disinfection methods of water treatment.