Library

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Presentation on Improving Air-Conditioner and Heat Pump Modeling.

Webpage describing indoor air quality.

Resource hub describing indoor air quality research performed by Lawrence Berkeley National Laboratory.

Document describing guidance on installing electric vehicle chargers at single-family and multifamily homes.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

Webpage providing all versions of the International Building Code (IBC) which is code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to...

Webpage with all versions of the International Fire Code (IFC), code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials...

Website with all versions of the International Plumbing Code (IPC), code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Webpage providing the latest versions of the International Wildland-Urban Interface Code (IWUIC), code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides...

Video course by the Lighting Controls Association presenting an overview of the basic functionality of today’s lighting controls, benefits and the basic questions to ask when identifying an appropriate lighting control strategy

Research study to help development of an application protocol for aerosol sealing of building shells that will eventually be demonstrated on buildings in retrofit and new construction.

Report examining performance measures in the context of a large-scale renovation project.

Link for the webpage of the Lighting Controls Association, an industry organization dedicated to supporting adoption of advanced lighting controls in commercial buildings through education. Their webpage contains a variety of resources regarding advanced lighting controls.

Webpage for the Lighting Design Lab (LDL), an organization which provides educational resources regarding advanced lighting controls and other electric building technologies.

Report presenting a cold climate project that examines the relationships among energy efficient single-family residential thermal enclosures, room-to-room temperature variations, and simplified space conditioning systems.

Report about a two-year study intended to document the energy performance of a house in each sub-metered area and compare the performance to modeled predictions and to assess the thermal comfort performance of the single point mini-split heat pump.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Report identifying the target market for solar water heaters and potential pathways and cost/performance targets that must be met for these systems to realize large energy savings.

Report focusing on managing the driving forces that move air and water vapor across the building envelope.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Guideline describing the importance of the different types of multifamily building attics and their unique challenges, and outlines strategies and materials used in air-sealing them.

Document covering two fundamental retrofit strategies for air sealing around air handling systems that are located within the living space in an enclosed closet.

Document describing good practices for insulating basements in new and existing homes.

Document pertaining to design and application guidance for combination space and tankless domestic hot water heating systems used in residential buildings, based on field evaluation, testing, and industry meetings.

Document describing a process to help builders, homeowners, and designers select energy-efficient windows for new and existing residential construction in all U.S. climate zones.

Report about evaporative condensers, to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads.

Document with evaluation of 14 heat pump water heaters (including three recently released HPWH products) installed in existing homes in the northeast region of the United States.

Document covering installation of high efficiency gas furnaces, including when to install a high efficiency gas furnace as a retrofit measure, how to identify and address risks, and steps to follow for the selection and installation process.

Document providing information on basement insulation, air sealing and water management retrofits.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Research study showing that for a relatively small investment, a variable speed pool pump can reduce pool pump energy use by 50% to 75%.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Document providing information and guidance about rehabilitating, retrofitting, and replacing wood window assemblies in residential construction.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Report covering the selection of roof vents for rainwater resistance.

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Book with indepth information about hydronic systems for residential and commercial buildings.

Report describing the work conducted for high performance hybrid assemblies.

Online course describing mold and mold remediation for environmental and public health professionals.

Research study examining the performance of existing multifamily ventilation central systems and explored alternative solutions in retrofit situations.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

Link to the flood plain management criteria section in the latest version of the National Flood Insurance Program (NFIP)

Report detailing the proposed point structure for the prescriptive approach of the energy efficiency chapter of the NGBS update.

Report about a test home project evaluating strategies to elevate the performance of existing homes to a level commensurate with best-in-class implementation of high performance new construction homes.