Library

Report summarizing the results of laboratory testing of 20 advanced power strip products.

Report describing research efforts focused on examining the audit reports for quality, comprehensiveness, and consistency.

A quick-reference guide advising homeowners on how to anchor home appliances and protect from seismic damages.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.

A quick-reference guide advising homeowners on how to elevate and protect outdoor HVAC equipment from high winds and floods.

A retrofit sheet providing information on elevating and securing water heaters to protect against damage during a flood.

A guide on how to anchor fuel tanks to avoid damage from flooding and seismic events to the home by using straps and solid concrete slabs.

Fact sheet describing methods for flashing and air-sealing windows and doors.

A brochure educating homeowners on how to install self-locking devices on cabinets, drawers and doors, including child-proof latches and drawer locks.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

Report describing extensive renovations to a historic home.

Report describing procedures for increasing sensible efficiencies through increased flow rates across the air handling unit and increased indoor coil sizes.

Report presenting results of a laboratory experiment studying combi systems as a mode to eliminate safety issues associated with natural draft appliances.

Document discussing changes in testing the annual performance ratings for solar water heaters.

Report promoting public safety and welfare by reducing the risk of earthquake-induced damage to existing homes.

Report providing retrofit measures intended to significantly reduce damage and increase occupant safety for existing buildings.

Report describing construction of test homes in Atlanta, GA meeting Building America savings targets and serving as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.

Website with consumer information about duct cleaning.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Website describing how solar water heaters -- also called solar domestic hot water systems -- can be a cost-effective way to generate hot water for your home.

Webpage describing the basics of solar plus storage operations on homes.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Research study presenting a unique opportunity to both identify and evaluate deep retrofit measures that are practical and potentially cost effective for the retrofit market, as well as review the cost effectiveness of the Passive House design approach for achieving energy savings in deep retrofits.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the current version of the standard, published in the year 2019...

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Report intending to provide useful information as the DOE/BA develops and implements comprehensive communications and outreach strategies for demonstration homes.

Document offering methods to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies.

Report describing the equipment selection of a split system air conditioner and furnace for an example house in Chicago, Illinois, as well as a heat pump system for an example house in Orlando, Florida.

Document targeting retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations that work to realize energy savings from home energy upgrades (HEUs).

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

Recovery advisory presenting key wind retrofit guidelines for buildings located in hurricane-prone regions. These retrofit guidelines are intended to help building owners and designers prevent or limit wind damage and water infiltration during high-wind events.

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

Research study making several recommendations to whole-home program designers and implementers for improving the cost effectiveness and reach of whole-home programs.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Information for properly sizing gas lines for use with tankless water heaters and other gas appliances.

Document about laboratory testing of five integrated heat pump water heaters (HPWH).

Document about NREL's repository of residential building characteristics and historical energy use data, used to improve accuracy of residential energy analysis tools.

Standard covering minimum required health and safety diagnostics and specifications for BPI's Building Analyst Professional certification.

Report using data from various sources to characterize the impact on human health and property damage from indoor environmental quality and other hazards.

Fact sheet providing the wind resistant provisions of the 2015 International Residential Code.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Report illustrating CAD drawings and modeling of bracing layouts for a gable roof truss.

Information sheet disucssing myths about insulated concrete forms.

Research study identifying barriers, industry status, critical obstacles to documenting added value from energy efficiency improvements, current opportunities to support reporting about energy efficiency, and next steps toward enabling energy efficiency financing market transformation.

Factsheet providing design guidance for engineers describing how to characterize snow drifts on roofs in three dimensions rather than two, as anticipated in the 2022 edition of the standards, ASCE 7 - Minimum Design Loads and Associated Criteria for Buildings and Other Structures.