Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2012 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Article describing how to stop air leaks around the windows and doors of a home.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Webpage from Suntegrity Solar describing different backup power generator options to prepare for future power outages.

Web based tool providing decision-making guidance for selecting wall assembly components.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

2019 version of California's plumbing code.

Web article describing utility customer’s right to use back-up generators during emergency events, including Public Safety Power Shutoffs (PSPS).

Website of the Cold Climate Housing Research Center.

Fact sheet describing changes made to the 2010 Florida Building Code with regards to wind design loads and requirements.

Installation manual for installing metal panel siding.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Article summarizing the IBHS stance on building practices that can mitigate the impact of high winds and storm surge on structures.

Information sheet discussing the properties and benefits of insulating concrete forms.

A fact sheet providing information on termite species and how to prevent them from entering into your home.

Webpage explaining what causes the formation of ice dams on roofs and steps to take to prevent them.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Online database with efficiency information about residential HVAC systems and commercial refrigeration equipment.

Checklist for the DOE Zero Energy Ready Home National Program Requirements Mandatory Requirement 7 (Renewable Ready).

Checklist describing solar water heating recommendations per the DOE Zero Energy Ready Home program.

Technical report describing a market assessment conducted on new home builders' window purchasing practices revealing insights to inform the development of thin triple-pane windows, utilizing a center pane of thin glass and krypton gas fill to achieve the performance of standard triple-pane windows...

Report covering the rainwater performance of building assemblies.

Article describing earthship homes.

Computer simulations comparing International Journal of Advanced Structural Engineering wind pressure differences between a gable-ended roof versus a hip roof versus a pyramidal-shaped roof.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Online reference containing general information about geothermal heat pumps.

Calculator to help homeowner's calculate the size of pool pump they need.