Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

Report assessing the energy performance of the 2011 EVHA winners and to align the EVHA program with the BA program.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

2012 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

Report summarizing the requirements to strenghthen new homes against property damage caused by high wind occurrences per the IBHS Fortified Homes High Wind Standard for New Homes.

Fact sheet summarizing the changes to the flood provisions in the 2012 I-Codes that appear in the 2015 edition.

Document describing the air leakage provisions of Appendix RA of the 2015 IECC (prepared for the State of Georgia to assist with compliance with their 2019 Energy Code).

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Guide providing engineering seismic design and building practices based on post-earthquake research.

Federal statistics about national energy consumption in residential homes.

Code set from IAPMO explaining plumbing standards. 2015 publication.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance in severe thunderstorms, straight-line wind events, and high winds at the outer edges of tornadoes.

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Guide for homeowners describing how to find and seal basement and attic air leaks, determine if attic insulation is adequate, make improvements safely, and reduce energy bills.

Research study estimating potential energy savings relative to conventional ducted air distribution, and identifying equipment requirements, costs, and barriers.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Document outlining the current and the proposed draws and estimates typical ratings changes from draw specification changes for typical systems in four cities.

Report describing how changing the air exchange rate of a home (the sum of the infiltration and mechanical ventilation airflow rates) affects the annual thermal conditioning energy.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Vinyl siding estimating and installation guide for vinyl siding products.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Acceptance criteria providing guidelines for demonstrating compliance with codes referenced in the criteria related to barriers to water migration in thin-set installations of ceramic tile and stone flooring and shower sub-pan linings.

Research study describing how envelope modifications in heating, ventilation, and air conditioning, and domestic hot water and renewable resources can result in considerable energy reductions, using the first full year of detailed data collected about a single-family home that experienced a series...

Article describing how to detail head flashing above a window.

Report on the design and evaluation of extended plate and beam.

Case study on the design and evaluation of extended plate and beam, located in Mount Joy Pennsylvania.

Report identifying common air leakage pathways typically found in two-story townhouse developments, including recommendations for cost effectively identifying and correcting air leakage in these multifamily buildings.

Study identifying common air leakage pathways in one type of low-rise multifamily building common in mixed-humid climates.

Article describing how to stop air leaks around the windows and doors of a home.

Report about two test home evaluations that provided valuable data about the true in-field performance of various building mechanical systems and LAMELs.

Updated detailed information about Formaldehyde.

Report on adding insulation to load-bearing mass masonry buildings.

Report analyzing design heating load sizing methods for superinsulated homes in cold climates and comparing them to the actual energy usage to determine if the building load calculation methodology should be changed for calculating the design heating load of these homes.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Report describing a field investigation of failure rates of whole-house mechanical ventilation systems installed in Florida homes.