Library

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Document describing a process to help builders, homeowners, and designers select energy-efficient windows for new and existing residential construction in all U.S. climate zones.

Report about evaporative condensers, to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Guideline describing information and specifications relevant to air-seal existing attics.

Document with evaluation of 14 heat pump water heaters (including three recently released HPWH products) installed in existing homes in the northeast region of the United States.

Document covering installation of high efficiency gas furnaces, including when to install a high efficiency gas furnace as a retrofit measure, how to identify and address risks, and steps to follow for the selection and installation process.

Document providing information on basement insulation, air sealing and water management retrofits.

Information sheet providing information on installing Rigid XPS foam board insulation to existing brick masonry walls.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report describing recommendations for optimizing flexible duct, constant-volume HVAC systems using junction boxes.

Research study showing that for a relatively small investment, a variable speed pool pump can reduce pool pump energy use by 50% to 75%.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Report describing solutions for supplemental dehumidification in warm-humid climates.

Document developed to help residential new construction builders transition from using a three-coat stucco system to a one-coat stucco system installed over 1 in. of expanded polystyrene (EPS) insulation.

Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Guide describing proper application, design, and installation of mechanical ventilation cooling systems for homes located in hot-dry and cold-dry climates, as well as a means of understanding the benefits, costs, and tradeoffs of these systems.

Document providing renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project.

Document providing information and guidance about rehabilitating, retrofitting, and replacing wood window assemblies in residential construction.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report covering the selection of roof vents for rainwater resistance.

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Book with indepth information about hydronic systems for residential and commercial buildings.

Report describing the work conducted for high performance hybrid assemblies.

Online course describing mold and mold remediation for environmental and public health professionals.

List of products approved by the Master Painters Institute.

Research study examining the performance of existing multifamily ventilation central systems and explored alternative solutions in retrofit situations.

This Photovoltaic (PV) Installer Resource Guide is an informational resource covering basic requirements for PV installations intended for individuals pursuing the Photovoltaic Installer Certification credential offered by the North American Board of Certified Energy Practitioners (NABCEP).

Report detailing the proposed point structure for the prescriptive approach of the energy efficiency chapter of the NGBS update.

Report about a test home project evaluating strategies to elevate the performance of existing homes to a level commensurate with best-in-class implementation of high performance new construction homes.

Information sheet about the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Report demonstrating cost-effective energy savings targets as well as improved comfort and indoor environmental quality associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort.

Document on the development of two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct operation and energy efficiency of a homes air conditioning and heating equipment.

Document about development of models for evaluating thermal performance of walls in existing homes that will improve the accuracy of building energy simulation tools when predicting potential energy savings of existing homes.

Document about development of a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Document about development of recommendations to help residential HVAC designers select optimal supply inlet size and system operating conditions to maintain good thermal comfort in low heating and cooling load homes.

Report covering wind loading on roofing assemblies.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Report providing detailed steps for builders, architects, and property managers to take for integrated pest management for control of a variety of pests including insects, rodents, and birds.

Information sheet providing guidance about the placement of ventilation approaches.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Document describing helpful information for hosts of public electric vehicle charging stations.