Library

Guide providing minimum design and construction requirements for storm shelters that provide a safe refuge from storms that produce high winds, hurricanes, and tornadoes.

2009 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2009 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Report assessing the energy performance of the 2011 EVHA winners and to align the EVHA program with the BA program.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Guide providing information for homeowners and renters on how to clean up residential mold problems and how to prevent mold growth.

Report discussing opportunities and trends in the U.S. home performance contracting industry, along with market drivers such as consumer demand; federal, state, and local programs; and utility and non-governmental programs.

Research study estimating potential energy savings relative to conventional ducted air distribution, and identifying equipment requirements, costs, and barriers.

Case study providing homeowners guidance on installing window air conditioners.

Guide developed to help contractors, building operators, and city officials successfully adopt cool roof and pavement technology.

Document outlining the current and the proposed draws and estimates typical ratings changes from draw specification changes for typical systems in four cities.

Information sheet about unvented fireplaces and combustion safety.

Link to the most recent version of ACCA Manual D, a standard outlining industry procedure for sizing residential duct systems.

Link to the most recent version of ACCA Manual J, a standard for producing HVAC equipment sizing loads for single-family detached homes, small multi-unit structures, condominiums, townhouses, and manufactured home

Link to the most recent version of ACCA Manual S, a standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Research study describing how envelope modifications in heating, ventilation, and air conditioning, and domestic hot water and renewable resources can result in considerable energy reductions, using the first full year of detailed data collected about a single-family home that experienced a series...

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Report identifying common air leakage pathways typically found in two-story townhouse developments, including recommendations for cost effectively identifying and correcting air leakage in these multifamily buildings.

Study identifying common air leakage pathways in one type of low-rise multifamily building common in mixed-humid climates.

Website describing indoor air quality, and common indoor pollutants and how to reduce exposure to them.

Article describing technologies available for monitoring indoor air quality (IAQ).

Website describing archived program inforamtion for the Air Sensors International Conference, hosted by the University of California, Davis.

Article describing how to stop air leaks around the windows and doors of a home.

Website describing electric vehicles, electric vehicle charging stations, and incentives for installing electric vehicle charging stations.

Regulatory Compliance Toolbox by the American Home Furnishings Alliance (AHFA) concerning health, safety, environmental, fashion and business information related to home furnishings.

Library describing ANSI-affiliated standards.

Report about two test home evaluations that provided valuable data about the true in-field performance of various building mechanical systems and LAMELs.

Report that collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for 15 housing types.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Webpage describing different types of appliance thermometers, how they work, and how they should be used by homeowners.

Report covering moisture and leakage issues associated with spray foam insulation application to the underside of roof sheathing.

Report describing partner approaches to achieving the Building America goal of 30% whole-house source energy savings using packages adopted at the community scale, using building projects in Florida as a reference.

Document describing recent discussions on indoor carbon dioxide (CO 2) levels.

This standard provides the minimum requirements for energy-efficient design of most sites and buildings, except low-rise residential buildings. It offers, in detail, the minimum energy efficiency requirements for design and construction of new sites and buildings and their systems, new portions of...

Report focused on foundation insulation R-values for cold climates and the design, construction, and performance implications.

Report describing methodology, analysis, and findings from a case study of a 110-unit retrofit of gas tankless water heaters in a hot/humid climate in Alachua County, Florida.

The exhaust from residential combustion appliances contains air pollutants and high levels of moisture that must be conveyed to the outdoors to maintain acceptable indoor quality.

Report assessing the accuracy of HEST as it was being developed and to provide information useful to DOE program managers and HEST development team at Lawrence Berkeley National Laboratory.

Articles describing attic and ceiling insulation, including mentions of baffles with protect insulation from wind washing.

Report about a project that examines implementation of advanced retrofit measures in the context of a large-scale weatherization program and the archetypal Chicago, Illinois, brick bungalow.

Report summarizing commissioning, short-term testing, utility bill data analysis, and results of on-site monitoring of a deep energy retrofit.

Article describing bidirectinoal charging and energy storage methods using electric vehicles.

Information sheet providing details on the vapor permeance of different types of materials used in building assemblies.

Case study about Artistic Homes of Albuquerque, New Mexico, the first home builder in the United States to offer true net zero energy construction to the average home buyer on every home it builds.

Expert meeting focusing on identifying gaps and barriers in combustion safety that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy...