Library

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Article describing strategies for reducing the risk of ice dam formation on roofs in winter.

A FAQ explaining the purpose of the Energy Independence and Security Act, a law which sets energy efficiency standards for lightbulbs.

Document providing a resource to help contractors renovate historic houses, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort.

DOE's consumer information about energy and laundry.

Document presenting a simple starting point to determine the most cost-effective Energy Savings Measure Packages (ESMP) for existing homes to achieve 15% and 30% savings in 37 locations across the United States.

ENERGY STAR factsheet describing the HVAC Quality Installation Program

EPA's market report about residential clothes dryers.

Research study evaluating operating conditions required to maintain uniform mixing, within high performance homes, under both heating and cooling conditions.

Research study that utilizes EnergyPlus equipped with the moisture capacitance model to analyze the indoor relative humidity in three home types.

Report describing research testing results on roof truss to wall connections in light frame wood systems.

Expert meeting held to discuss simplified space conditioning systems in low load homes, including the relationship between advanced thermal enclosures, space conditioning systems and comfort.

Webpage from Ready.gov explaining what qualifies as 'extreme heat', how to be safe during an extreme heat event, and how to prepare for extreme heat in homes

Handbook describing the permitting process regulating the transfer of stormwater from private property owners to the State of Florida Department of Transportation stormwater drainage systems.

Fact sheet describing how to prepare for hurricane season and mitigate damage from floods and high winds.

Guide providing homeowners tips on how to secure bookcases and other heavy furniture with brackets and child-proof drawer and cabinet locks.

Fact sheet providing an overview of how to properly prepare for a winter storm and how to protect yourself before, during, and after one.

Information sheet with an analysis of mini split heat pump systems.

Report describing a simple and general way to generate House Simulation Protocol (HSP)-consistent internal sensible and latent loads in unoccupied homes.

A guide for designers, architects, engineers, and fire experts on how to design rainscreen and ventilated cavities such that they don’t contribute to the spread of a fire.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.

Fact sheet instructing installers about flashing installed on a FORTIFIED roof and points to roof covering manufacturers for flashing installation instructions.

Report describing a project aimed at developing validated models and design tools for foundation heat exchangers.

Article describing a numerical model that can be used to size foundation heat exchanger (FHX) systems.

Webpage from Guthrie County REC with video and image links illustrating how to safely use backup generation during power outages.

Article describing issues with attic ventilation fans and why the state of Georgia residential code does not allow plug-in attic ventilation fans.

Report covering the fire performance of combustible cladding over combustible insulation.

Factsheet describing the uses and benefits of ground-source heat pumps for affordable housing, assisted living, dorms and hotels.

Presentation about proper installation of flexible ducts.

Document providing supplemental information for code enforcement professionals about header hangers in bearing walls.

Article discussing the advantages of using heat pumps and/or hydronic forced air heat instead of furnaces in high-performance homes.

Information sheet presenting the correct methods for building an insulated cathedral ceiling.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Information sheet presenting techniques for installing cellulose insulation.

Fact Sheet describing the need for supplemental dehumidification, dehumidifier configuration options, and design considerations.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Article describing issues with condensation in unvented attics insulated with open-cell spray foam.

Report documenting the results of a NYSERDA-funded research project to demonstrate the costs and benefits of a best practice systems approach to improving exhaust ventilation system performance in five multifamily buildings in New York State.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

Report providing general guidelines for the installation of rolled erosion control products.

Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.

Report describing the objective evaluation of space conditioning interactions between heat pump water heaters and home heating systems during winter 2016-2017, revealing a smaller than anticipated impact on space conditioning loads.

Report covering reservoir claddings, back ventilation and vapor throttles.

Article explaining how to use integrated pest management to choose methods of pest control that are safe and effective.