Library

Standard document establishing construction standards for one- and two-family dwellings constructed in high wind regions.

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the version of the standard that was published in the year 2011...

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Document identifying differences between the requirements for construction documents for high performance housing and the documents that are typically produced for conventional housing.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

Question and Answer article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Fact sheet describing water management in a residential building.

An introduction to the insect termites.

Fact sheet describing building codes, seismic codes, and code enforcement.

A book describing seismic retrofits to help contractors and engineers understand how to properly retrofit a home in a cost-effective manner.

Article describing the risks associated with vented and unvented crawlspaces in different climate zones.

Guide describing details that serve as a visual reference for each of the line items in the Thermal Enclosure System Rater Checklist.

Research study investigating the thermal efficiency of fasteners, namely drywall screws and siding nails, in high-performance wood-framed walls.

Research study describing a detailed 3D computational fluid dynamics model that evaluates the thermal performance of uninsulated wall assemblies.

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Guide describing details that serve as a visual reference for each of the line items in the Water Management System Builder Checklist.

A builder checklist guide for the water management of properties with appropriately-designed building technologies.

This text is one of series of supporting documents that provide guidance on implementing the World Health Organization (WHO) Guidelines for drinking-water quality; intended to support improvement of water safety within buildings.

Resource that provides a checklist of program criteria for water-efficient new homes under the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Guide designed to help builders better understand and meet the hot water delivery system criteria as specified in EPA's WaterSense New Home Specification.

Report assessing the performance and cost-effectiveness of a zero net energy community project in Davis, CA.

Article discussing the risks that can occur from undercutting bedroom doors to provide return airflow from bedrooms, as well as corrective measures that can be taken to address these risks.

A list of exterior building products and materials approved for use in wildland urban interface zoned homes. These products are non-combustible or ignition-resistant.

An example of wildland urban interface construction requirements for new buildings built in very high fire risk zones/areas.

Presentation about the combustion properties of wood.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.

Report describing Net Zero house design with sloped roof assemblies.