Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2012 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Article describing different kinds of water-resistant backer boards.

Webpage from Suntegrity Solar describing different backup power generator options to prepare for future power outages.

Web based tool providing decision-making guidance for selecting wall assembly components.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

2019 version of California's plumbing code.

Web article describing utility customer’s right to use back-up generators during emergency events, including Public Safety Power Shutoffs (PSPS).

Website of the Cold Climate Housing Research Center.

Installation manual for installing metal panel siding.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article summarizing the IBHS stance on building practices that can mitigate the impact of high winds and storm surge on structures.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

A fact sheet providing information on termite species and how to prevent them from entering into your home.

Webpage explaining what causes the formation of ice dams on roofs and steps to take to prevent them.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Document providing design guidance and software tool information for forced-air HVAC systems.

Checklist for the DOE Zero Energy Ready Home National Program Requirements Mandatory Requirement 7 (Renewable Ready).

Checklist describing solar water heating recommendations per the DOE Zero Energy Ready Home program.

Information about dense pack, cellulose insulation.

Technical report describing a market assessment conducted on new home builders' window purchasing practices revealing insights to inform the development of thin triple-pane windows, utilizing a center pane of thin glass and krypton gas fill to achieve the performance of standard triple-pane windows...

Report covering the rainwater performance of building assemblies.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Computer simulations comparing International Journal of Advanced Structural Engineering wind pressure differences between a gable-ended roof versus a hip roof versus a pyramidal-shaped roof.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.