Library

Fact sheet describing drip irrigation for landscaping.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Standard providing minimum functionality requirements for earthquake-actuated automatic gas shutoff devices; applicable to systems carrying natural gas and propane, the devices are used in piping, equipment, and appliances typically found in structures of three stories or less.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Bulletin describing the components of ECM motors and comparing their efficiency with PSC motors.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

A map describing the average temperature of shallow groundwater in Fahrenheit across the continental United States.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Technical report evaluating the effects of heat pump water heaters on heating and cooling energy usage in laboratory homes.

Report describing best practices for installing electric vehicle chargers.

A San Diego County standard highlighting the requirements for residential emergency vehicle turnarounds.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

Powerpoint on attic ventilation developed as training material for the Weatherization Assistance Program.

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Program criteria for residential exhaust fans used for ventilation.

Report evaluating the accuracy of the regression technique used in 2006 by using the same least-squares regression analysis on data created from hourly energy simulation software.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

Technical report presenting the results of an evaluation of homes using high-efficiency mini-split heat pumps to supplement the primary heating and cooling systems.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Report on the performance of range hood exhaust fans.

Report presenting the process of a residential retrofit project for houses in the states of Florida and Alabama, including findings at the time of reporting and highlights of the first home to meet the target HERS Index of 70.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

Website providing links to scalable guidance and tools about the importance of earthquake mitiation to the private sector, its owners, managers, and employees.

Report on the field evaluation of whole-building approaches and estimation of the relative contributions of select technologies toward reducing energy use related to space conditioning in new manufactured homes.

Report describing the in situ performance evaluation of newly released heat pump water heaters (HPWHs), highlighting their energy and cost savings potential compared to conventional electric resistance water heaters and other alternatives, based on data collected from installations in Massachusetts...

Report describing research about a test implementation of an unvented tile roof assembly in a hot-humid climate.

Map of the wind-borne debris region of Florida

Factsheet describing fire related terms such as noncombustible, fire resistant, fire retardant, flame spread, how they are applied, and related testing standards.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Article discussing flow-through assemblies of walls.

Checklist providing specific information about the type of residential building eligible for designation consideration in the FORTIFIED Home program.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Fact sheet describing the use of foundation walls in coastal buildings, including footing embedment, wall height, materials and workmanship, lateral support, flood openings and ventilation requirements, and interior grade elevations for crawlspaces; also published in FEMA P-499 “Home Builder’s Guide...

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Conference paper describing how retrofits were used in a Florida home to change it from a high energy user to a near zero-energy home.

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Webpage from Washington State Department of Health describing how to use backup generators properly to not overload during a power outage.

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

Article describing techniques to air-seal townhouses and row houses.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.

Brochure describing advanced framing techniques.

Brochure describing advanced framing techniques.

Information sheet about air barriers.

Brochure describing insulation and air-sealing details.

Document providing a roadmap to aid Habitat for Humanity affiliates in building high performing houses by using materials and techniques that are affordable, do not add any maintenance burden, and are volunteer friendly.