Library

Installation tips and product suggestions for mounting hardware.

Research study describing the impact resistance performance of advanced framed wall systems with insulating sheathing as the primary sheathing from wind blown debris.

Fact sheet providing information on how to identify issues and improve performance in central exhaust systems.

Report detailing natural ventilation and passive airflow systems.

Article describing excess flow valves installed on gas lines to shut-off natural gas flow to a home in the event that a gas line is severed due to an earthquake, natural disaster, earthquake, etc.

Article explaining installing cavity insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Article discussing indoor water management.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Information sheet about efficiency and health benefits of MERV filters.

Information sheet providing links and resources for insulating basements in cold climates.

Article showing steps for kick out flashing at roof-wall intersection.

Report targeting the growing number of homes utilizing deep retrofit measures and new construction practices to realize sufficiently lower infiltration levels that require mechanical ventilation as prescribed by ASHRAE Standard 62.2.

Article describing a technique for installing a skylight and avoiding potential water leaks with the use of a peel-and-stick (or self-adhesive) membrane under the flashing.

Guide for homeowners describing actions they can take to modify their home and the surrounding site to create a survivable space to reduce the amount of damage a home would likely experience during a wildfire.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Standard technical manual with information about HVAC balancing, testing air and hydronic systems.

Report describing the use of passive vents as a source of outdoor air in multifamily buildings.

Repor ourlining testing results from a 53 home monitored sample, long-term energy use of electric resistance clothes dryers.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

FEMA report describing findings from an investigation of Hurricane Ike in Texas and Louisiana and residential construction recommendations based on those findings.

Article describing a steel connector product for jack rafter connections.

Report describing the experimentally evaluated potential of a novel residential night cooling concept.

Newsletter providing news and information to members of the New Jersey National Guard.

Guide providing information on controlling attic ductwork sweating.

A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.

Report describing research on how to reduce energy used by residential homes by applying shallow and deep retrofits to an existing home.

Report describing single retrofit measures applied to shallow retrofitted homes that could be used to refine the deep retrofit package.

Article outlining moisture accumulation in open cell spray polyurethane foam.

Article describing how to properly manage condensing HVAC equipment.

Report reviewing the design and the first four months of energy performance of a near zero energy project home in Callaway, Florida during the second half of 2008.

Report reviewing the design of a net zero energy home in Gainesville, Florida and then focusing on the first six months of energy performance of the project home during the second half of 2008.

Webpage for home owners describing ways to prepare indoor and outdoor fuel tanks to avoid displacement during floods.

Report addressing flood, wind and seismic hazards and recommends several multi-hazard resistant foundation designs of manufactured homes.

Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Fact sheet describing conditions for wildfire, how a home catches fire, how to create a survivable space, the ideal fire resistant home.

Report providing recommended designs and guidance for rebuilding homes destroyed by hurricanes in the Gulf Coast.

Report providing information on mechanical air-cleaning devices for ventilation when conventional methods are not warranted.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

Website providing an introduction to the concepts and principles of seismic design.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

Second part of an article series focusing on servicing high efficiency modcon boilers. This part focuses on paperwork and follow-up communication with the homeowner for scheduling annual maintenance.

Article describing the author's experiences in owning and servicing a modcon boiler.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Report describing a comparison of hydrothermal performances of DryRightTM fiberglass batts and kraft-faced fiberglass batts in a south facing wall assembly with a moisture storage cladding material.

Report providing a synopsis of a project to evaluate the performance of a roof-integrated solar water heating system.