Library

Building code for the state of Florida.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

2015 edition of code establishing a baseline for energy efficiency by setting performance standards for the building envelope (defined as the boundary that separates heated/cooled air from unconditioned, outside air), mechanical systems, lighting systems and service water heating systems in homes...

2015 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2015 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

Report providing builders in the hot-dry and mixed-dry climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Report telling consumers the risks of radon, how radon gets into a home, and steps consumers can take to reduce radon exposure in their homes.

Guide for homeowners describing how to find and seal basement and attic air leaks, determine if attic insulation is adequate, make improvements safely, and reduce energy bills.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Vinyl siding estimating and installation guide for vinyl siding products.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Standard providing a universally accepted definition for quality installation for residential and commercial heating, ventilating, and air conditioning applications.

Document detailing the requirements, roles, and obligations for participants in an organized effort, ensuring that HVAC installations comply with the ANSI/ACCA 5 QI – 2010 (HVAC Quality Installation Specification) QI Standard.

Acceptance criteria providing guidelines for demonstrating compliance with codes referenced in the criteria related to barriers to water migration in thin-set installations of ceramic tile and stone flooring and shower sub-pan linings.

Article describing how to detail head flashing above a window.

Report on the design and evaluation of extended plate and beam.

Brochure about creating an air barrier by sealing drywall assemblies.

Brochure about creating an air barrier at tub, shower and fireplace walls.

Paper describing an experiment to quantify shade tree impacts on cooling-related electricity consumption, finding that there may be sizable benefits in hot regions.

Report summarizing systems research activities for new housing in hot-humid climates, including NightCool, interior duct systems in manufactured housing, ventilation and dehumidification, plug load reduction and solar and conventional hot water.

Updated detailed information about Formaldehyde.

Report about a building project in the marine climate.

Report describing a field investigation of failure rates of whole-house mechanical ventilation systems installed in Florida homes.

Document highlighting federal accessibility laws which may apply to a housing development, and common mistakes made in the field which, if avoided, will help to ensure compliance.

A basic guide walking through the various types of valves useful in mitigating the effects of earthquakes and other seismic events on natural gas pipelines for residential use.

Information sheet describing techniques for insulating basements.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Case study describing solar thermal and photovoltaic systems in new construction.

Brochure about air sealing windows.

Brochure explaining the essential basis for advanced framing and some of the more common advanced framing details.

Brochure providing information about flashing in all cimates.

Fact sheet describing air-sealing at rim joists.

Brochure with details on HVAC duct air sealing.

Brochure with information about ducts in conditioned space.

Brochure with information on maintaining drainage plane continuity at deck ledger locations.

Information sheet with details on pan flashing for exterior walls.

Information sheet about sealing combustion appliances to ensure good indoor air quality.

Information sheet about insulating slabs.

Information sheet about soil gas control strategies for foundations.

Information sheet offering general recommendations on supplemental humidity control and outlines viable system configurations.

Information sheet providing recommendations on the installation of vapor control layers.

Information sheet providing information about vapor management in building assemblies.

Presentation describing details for installing structural insulated panels (SIPs).

Case study describing solar thermal and photovoltaic systems in new construction.

Document describing the Building America research benchmark for the residential building program.

Report considers a number of promising wall systems that can meet the requirement for better thermal control.

An article discussing how different metal roof materials and attachment methods affect the ability of the roof to thermally expand and contract and the durability of different solutions.

Report describing combined space- and water-heating (combi) systems using a high-efficiency direct-vent burner.