Library

Guide providing information for professional builders and contractors rehabbing flooded single-family houses with emphasis on safe practices and the most important activities in the rehab process.

Document presenting results from testing prototype HVAC duct system designs that would locate the entire length of duct work within the air and thermal barriers of the building envelope. These include one that incorporated a high-side supply register, one that utilized a single soffit located within...

U.S. DOE report summarizing findings from literature and research relevant to HVAC installation practices.

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Recovery advisory guide providing guidance on existing code requirements as well as recommend best practices for attachment design, installation, and maintenance of rooftop solar panels to increase panel wind resistance in the U.S. Virgin Islands after Hurricane Maria.

Article describing San Francisco and how impending seismic activity may affect modern skyscrapers.

Reports describing a mathematical methodology for assessing the seismic performance of buildings.

Website providing a link for purchasing NFPA 703, Standard for Fire Retardant—Treated Wood and Fire–Retardant Coatings for Building Materials.

Website providing a link for purchasing NFPA 1144, Standard for Reducing Structure Ignition Hazards from Wildland Fire.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

Website providing information on all types of pest management for multi-family housing.

Article describing three ways to strengthen the roof-to-wall connections in an existing home.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

A story about bees building a hive in the drainage plane behind the brick veneer siding. The bees entered the wall through unprotected drainage holes.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Article from Texas A&M University and the University of Maryland analyzing why and how urban flooding happens and what can be done to mitigate damage.

Conference paper summarizing the relative performance of currently available Heat Pump Water Heaters (HPWH) models, the energy implications of different installation locations (garage, basement, or conditioned space) and ducting configurations (exhaust ducting, full ducting, or no ducting), as well...

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Document providing an overview of the Thermal Bypass Checklist for the ENERGY STAR Qualified Homes program.

Report discussing Building America whole house systems research within the broad effort to reduce or eliminate the environmental impact of building and provides specific recommendations for future Building America research based on Building Science Corporations experience with several recent...

NAFA’s user guide for understanding ANSI/ASHRAE Standard 52.2-2012.

Document providing a case study of commissioned performance measures that justify costs for these demonstration and "live" show homes.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Document describing the measured annual performance data from 12 recent-vintage very low energy homes in the US.

Website describing proper methods for installing vinyl siding on homes.

Report describing concentrations of 54 volatile organic compounds (VOCs) and ventilation rates that were measured in four new manufactured houses over 2 - 9.5 months following installation and in seven new site built houses 1 - 2 months after completion.

A guide describing how to do wall bracing calculations and evaluations.

A preparedness guide guiding homeowners on how to secure an indoor home water heater safely to wall studs.

A San Diego County standard outlining the requirements for installing fire protection water tanks.

Webpage describing the Wildland Urban Interface (WUI) and how to plan residential building to mitigate wildfire risks associated with building in the WUI.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

DOE presentation describing a project to study window attachments.

Article describing how generators being used for backup power during outages can lead to safety concerns.