Library

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2009 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2009 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

2012 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2012 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

Report describing practices and considerationsfor more efficient water use in pools, spas, and fountains.

Code describing energy codes for energy-conserving and compliant designs in Florida.

The purpose of this standard is to establish minimum requirements to safeguard the public health, safety and general welfare relative to the design, construction and installation of storm shelters constructed for protection from high winds associated with tornadoes and hurricanes.

2015 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Florida building code including all the amendments and additions by Florida for the wind-borne debris regions and the high-velocity hurricane zone.

Document describing portions of the flood provisions from the 2018 editions of the IBC, IRC, IEBC, IMC, IPC, IFGC, IFC, ISPSC, IPSDC, and ICC Performance Code.

Article from the Sierra Club explaining 5 steps to take to ensure your home's resistance to wildfires, including site maintenance and roof construction guidelines.

Article describing seven reasons to mulch gardens.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Report describing the results of a field study of five different ventilation system types in 29 homes in the Pacific Northwest.

Report describing testing and analysis on deep energy retrofits of existing single-family homes in the U.S.

Paper describing a proposed method for quantifying tree and vegetation evapotranspiration effects on city climate

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Report describing the experience gained from AIA’s Disaster Assistance Program with first-hand accounts of disaster response and recovery, case studies and other best practices, including approaches to designing buildings to be more adaptable to uncertainty.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

This report describes research conducted to evaluate air transfer between the garage and living space in a single-family detached home constructed to the 2009 IECC by a production home builder in Maryland.

Case study examining the problem of unwanted air transfer from garage to living space and the effectiveness of garage exhaust ventilation or house supply ventilation to provide a solution to that.

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Manual describing best practices or home construction in Alaska and northern climates.

Report outlining workflow and results of regression models on monthly and daily utility data (meter readings of electricity consumption), outlining a process for screening and gathering useful results from inverse models.

Webpage providing mapping tool for obtaining ground snow load, based on ASCE 7-10, for any location in the contiguous United States, with the exception of locations requiring a case study due to extreme local variations in ground snow loads. Fee required for some data.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Webinar answering code-related questions on duct leakage tests, moisture levels in attics and crawlspaces, combustion equipment in conditioned attics, ventilation in multifamily buildings, and continuous insulation in residential construction.

Information sheet about reservoir claddings.

Report providing water management details for roof assemblies.

Presentation about building highly efficient, affordable homes that will achieve 40% whole-house energy savings in mixed-humid climates.

Document describing the Building America research benchmark for the residential building program.

Web report explaining how correct filter sizing is an issue that applies to all new and existing homes that use ducted HVAC systems.

Document with the Quality Control Checklist developed as both a guide to assist in the transition to high performance home building, and as a simplified tool to be used as part of any builder's on-site quality control procedures.

Article published by American Society of Civil Engineers on different building types and their effectiveness resisting extreme heat from a building envelope perspective.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

This is a guide for establishing smoke-free policies in public housing and multifamily properties.

News article from SFGate explaining and giving figures on how chimney failure is the most common type of damage to homes during an earthquake.

Report on the stability of furring strips as a means for cladding attachment over walls with thick exterior rigid insulation.

Website providing weather data.

Report assessing the science of climate change with a focus on the U.S.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

ENERGY STAR clothes dryer buying guidance for consumers.

Report describing retrofitting options and methodology for architects, developers, and property owners to use when making decisions about retrofits for common building types in NY.

Information guide describing issues with concrete floors, in multiple climate zones.