Library

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Report describing advanced framing techniques, including discussion of cost and energy savings.

Manual describing best practices or home construction in Alaska and northern climates.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Article describing different kinds of water-resistant backer boards.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Technical fact sheet proving information on creating defensible space to reduce the risk of damage from fires to property.

Document providing design guidance and software tool information for forced-air HVAC systems.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Report describing construction site erosion and sediment control practices recommended and required by a county planning department.

Report on the performance of range hood exhaust fans.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

Factsheet for home and business owners describing ways to anchor fuel tanks to avoid displacement in floods.

Short guide from FEMA describing how to anchor tall bookcases and file cabinets during seismic events.

Summary document describing flood resistant building materials and some tips for building flood resistant walls.

Technical bulletin describing a set of standards for building materials able to withstand flood waters as needed with wet floodproofing.

Factsheet describing backflow valve benefits and tips.

Brochure detailing how to latch and lock cabinets and drawers to prevent injury to residents of the home.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Map of the wind-borne debris region of Florida

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Journal article describing energy and cost savings potential from air sealing multifamily town homes.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Brochure-guide describing swales and their qualities, including objective, maintenance, and design considerations.

Fact sheet describing foundation design criteria, foundation types suitable for coastal environments, and addressing foundations for high-elevation coastal areas (e.g., bluff areas); also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Guide describing retrofit procedures for gable end roofs.

A builder's guide describing hurricane-resistant reinforcements for gable ends.

Webpage from Washington State Department of Health describing how to use backup generators properly to not overload during a power outage.

Report investigating the status of the geothermal heat pump (GHP) industry and technology in the United States, assembling GHP energy savings potential, identifying key barriers to application of GHPs, and identifying actions that could accelerate adoption of GHPs.

Document that gives a step-by-step approach for designing attachments for cladding materials through foam sheathing.