Library

Report covering coating and back venting wood based claddings and trim.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Information sheet describing correct application of stucco.

Paper describing case studies on urban vegetation and greenways and their impacts on city climate and building performance.

A report describing methods for constructing homes and treating soils to reduce the risk of termites in buildings.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Report providing a selected compilation of seismic rehabilitation techniques and guidance on which techniques are commonly used to mitigate specific seismic deficiencies in various model building types.

Document with information on preventing termites when using ICFs.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Case study of new home construction in the hot-humid climate.

Design guide providing technical information regarding building with thermal mass.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Report documenting the process and outcomes involved in achieving the U.S. Department of Energy Zero Energy Ready Home (ZERH) program certification standards while helping homebuilders in Climate Zones 5 and 6 in the Upper Midwest achieve ZERH certification.

Information sheet providing definitions, applications, and techniques for applying air barriers.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Guide providing information about controlling rainwater through use of drainage planes.

Information sheet describing the function of a vapor barrier, and methods to retard the migration of water vapor.

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

Report summarizing results from a study in Massachusetts that aimed to upgrade existing homes and incorporate solar thermal systems.

Report covering the migration of wind-blown embers in roof vents.

Fact sheet describing how to identify heat-related illness and what actions to take.

Resource that provides guidance when choosing products that meet WaterSense program requirements.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

Study showcasing the location of the highest uplift force on the hip, ridge, and perimeter regions of roofs, and thus roofing material needs for the most fasteners and adhesive at these locations.

Article discussing structural and nonstructural building components and illustrates a variety of wind-induced damages, including wind-driven rain infiltration.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.