Library

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2009 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

Webpage with links for all 2010 Florida building codes.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of the code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides ignition-resistant construction requirements to protect against fire exposure...

A colored map showing seismic zones across the United States, ranging from lowest to highest seismic hazards.

Report assessing and scoring code enforcement and administration and contractor licensing in the 18 states most vulnerable to catastrophic hurricanes along the Atlantic Coast and the Gulf of Mexico.

Code set from IAPMO explaining plumbing standards. 2018 publication.

A guidebook helping builders in hot-humid climates design and construct homes for energy efficiency, durability, health, safety, and comfort.

Report describing measures that builders in mixed-humid climates can use to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Article describing methods for venting a vented attic and a roof assembly over an unvented attic.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Document describing adobe construction, its weakness to earthquakes, and techniques used to improve seismic resistance for both new construction and existing adobe buildings.

Report investigating implemention of advanced power strips for entertainment and home office electronics would reduce energy consumption across the residential market.

Document providing guideance and considerations for duct design in an energy efficient house.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Website article interviewing the inventor of the Larsen truss, a history of its use, and a discussion of its advantages and disadvantages.

Article about different types of weather resistant barrier.

Report providing information regarding the benefits and challenges associated with the installation of earthquake-actuated automatic shut-off valves (ASVs) or remote-control valves (RCVs) to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Article describing air sealing and air barriers in buildings.

Technical report describing the thermal performance of 40 common building envelope details for mid- and high-rise buildings, including analyses to optimize energy efficiency and reduce thermal bridging.

Standard establishing the minimum whole-building energy performance requirements for energy efficient residential buildings.

Report describing methodology to assess and improve the accuracy of whole building energy analysis for residential buildings.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Report covering interior energy retrofits of masonry buildings.

Article describing the building science implications of insulating vented or unvented attics.

Article describing the research into insulating vented versus unvented attics.

SPFA website signup page to access SPFA documents.

Information sheet from FEMA on preparation for extreme heat, including measures for keeping homes cool.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Article describing selecting insulation for minimizing condensation risks.

Report examining the cost differences between a typical home and a home constructed using wildfire-resistant materials and design features.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Document providing a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the marine climate.

Report provides a proposed set of guidelines for estimating the energy savings achieved by a package of retrofits or an extensive rehabilitation of an existing home.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry / Mixed-Dry Climate Region on a cost-neutral basis.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Report providing a summary of key lessons learned from the first ten years of the Building America program and also included a summary of the future challenges that must be met to reach the programs long term performance goals.

Document about testing software predictions of retrofit energy savings in existing homes.

Presentation about advanced framing techniques.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

Training manual on how to locate ducts within conditioned space and compact design.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Report summarizing the key opportunities, gaps, and barriers identified by the national laboratory white papers discussing long-term 50% energy reduction goals.

You can save energy and maintain a comfortable swimming pool temperature by using a smaller, higher efficiency pump and by operating it less.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Website discussing building foundation problems caused by settling soil in Colorado.