Library

Article outlining the casuses and solutions for ice dam problems.

Article describing how air speed affects thermal comfort and how fans can provide energy savings.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Report discussing the importance of durability and energy efficiency in building construction.

Article describing the second step of a three-step process for the installation a tubular skylight, using peel-and-stick flashing tape instead of roof cement, and integrating the roof underlayment with the flashing.

Report about promoting energy efficiency for Hilton Head Island.

Webpage describing how to conserve heat or find alternative heat sources during a power outage to keep one room warm.

This paper discusses model validation using data from three thermosiphon systems.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Report about an experimental evaluation has been conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

Report providing guidance on protecting foundation walls and enclosures from flood damage.

Report briefly reviewing past research on the effects of occupant behavior on residential energy use and then covering a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida.

Information sheet about how to reduce thermal bridging in walls.

Document outlining the approach to quality assurance in the construction process as recommended by Building Science Corporation for new residential construction.

Document covering basic moisture control principles in the design of above-grade building enclosures; driving rain as a moisture load on walls; a classification system of the various rain control strategies available for walls; and good design practises for walls.

Flyer describing reasons and best practices for raising electrical systems above flood-levels.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Information sheet designed for the residential construction and remodeling industries, as well as owners and managers working in affordable housing. This sheet presents building guidance for both new construction and rehabilitation, as well as practices that can be used by property maintenance...

Document reviewing ventilation strategies for different climate zones that also includes schematic drawings and photographs of various ventilation installations.

Guidance document describing urban heat islands, what they are, how they form, why we care, and including some strategies to reduce them.

Guide providing information for professional builders and contractors rehabbing flooded single-family houses with emphasis on safe practices and the most important activities in the rehab process.

Document presenting results from testing prototype HVAC duct system designs that would locate the entire length of duct work within the air and thermal barriers of the building envelope. These include one that incorporated a high-side supply register, one that utilized a single soffit located within...

Paper describing the development and testing of an affordable net-zero energy house in Lenoir City, Tennessee.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

Article describing three ways to strengthen the roof-to-wall connections in an existing home.

Information sheet describing correct application of stucco.

A report describing methods for constructing homes and treating soils to reduce the risk of termites in buildings.

Report providing a selected compilation of seismic rehabilitation techniques and guidance on which techniques are commonly used to mitigate specific seismic deficiencies in various model building types.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Case study of new home construction in the hot-humid climate.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Document providing an overview of the Thermal Bypass Checklist for the ENERGY STAR Qualified Homes program.

Design guide providing technical information regarding building with thermal mass.

Report discussing Building America whole house systems research within the broad effort to reduce or eliminate the environmental impact of building and provides specific recommendations for future Building America research based on Building Science Corporations experience with several recent...

Information sheet providing definitions, applications, and techniques for applying air barriers.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Guide providing information about controlling rainwater through use of drainage planes.

Information sheet describing the function of a vapor barrier, and methods to retard the migration of water vapor.

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

Document providing a case study of commissioned performance measures that justify costs for these demonstration and "live" show homes.

Report summarizing results from a study in Massachusetts that aimed to upgrade existing homes and incorporate solar thermal systems.

Document describing the measured annual performance data from 12 recent-vintage very low energy homes in the US.

Report describing concentrations of 54 volatile organic compounds (VOCs) and ventilation rates that were measured in four new manufactured houses over 2 - 9.5 months following installation and in seven new site built houses 1 - 2 months after completion.

A guide describing how to do wall bracing calculations and evaluations.

A preparedness guide guiding homeowners on how to secure an indoor home water heater safely to wall studs.

Fact sheet describing impact-resistant window systems with specifics on Florida’s building codes.