Library

Case study on exhaust ventilation and corresponding outdoor air intake strategies implemented in high-performance new-construction multifamily buildings.

Report detailing the effects of replacing PSC motors with more efficient, variable-speed motors.

In this report, BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low-energy, high performance, homes in a hot-humid climate.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report describing research that helps inform best practices for air-sealing multifamily buildings in the Northeast.

Article describing RESNET guidance on evaporative coolers.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Website with information for consumers about solar thermal systems for homes.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Article describing frost-protected shallow foundations with construction drawing details.

Website with prepopulated information about the United States renewable resources.

Website providing information about the Gossamer Wind Series Ceiling fans, conceived by Danny Parker at the Florida Solar Energy Center as a means of realizing the energy efficiency and comfort potential of ceiling fans.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Provides consumers with general information on solar water heating systems and how to select a contractor.

Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.

Report describing for homeowners how to protect their homes from flooding, 3rd Edition.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Article describing the stack effect in buildings.

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Standards criteria supporting ICC HVAC duct support standards.

Report summarizing the status of a central hydronic heating system project in multifamily housing at the conclusion of the 20112012 heating season.

Recommendations from IBHS describing how to safely use generators during winter storm power outages.

The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

A publication describing how to protect coastal investments by adapting to natural processes and protecting coastal environments and shorelines.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Guideline describing information and specifications relevant to air-seal existing attics.

Report describing recommendations for optimizing flexible duct, constant-volume HVAC systems using junction boxes.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Report describing solutions for supplemental dehumidification in warm-humid climates.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

Article discussing moisture control in buildings as well as building design and construction strategies for keeping buildings dry and allowing buildings to dry out if they do get wet.

List of products approved by the Master Painters Institute.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Information sheet providing guidance about the placement of ventilation approaches.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Article describing airflow within buildings due to pressure differences.

Webpage from DOE describing how to conserve energy and save money with a home energy audit.