Library

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

A colored map showing seismic zones across the United States, ranging from lowest to highest seismic hazards.

Report assessing and scoring code enforcement and administration and contractor licensing in the 18 states most vulnerable to catastrophic hurricanes along the Atlantic Coast and the Gulf of Mexico.

Code set from IAPMO explaining plumbing standards. 2018 publication.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solutions.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Manual describing best practices or home construction in Alaska and northern climates.

Article describing air sealing and air barriers in buildings.

Standard establishing the minimum whole-building energy performance requirements for energy efficient residential buildings.

This report outlines research activities that are expected to facilitate the adoption of energy retrofits by remodeling contractors and roofing contractors using retrofit panels which applicable to many existing house designs in most climates and markets.

Report covering interior energy retrofits of masonry buildings.

Technical article describing issues and moisture concerns related to weatherization efforts.

Article describing the building science implications of insulating vented or unvented attics.

Article describing the research into insulating vented versus unvented attics.

Information sheet from FEMA on preparation for extreme heat, including measures for keeping homes cool.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Presentation about building highly efficient, affordable homes that will achieve 40% whole-house energy savings in mixed-humid climates.

Report examining the cost differences between a typical home and a home constructed using wildfire-resistant materials and design features.

Document describing the Building America research benchmark for the residential building program.

Document with the Quality Control Checklist developed as both a guide to assist in the transition to high performance home building, and as a simplified tool to be used as part of any builder's on-site quality control procedures.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

You can save energy and maintain a comfortable swimming pool temperature by using a smaller, higher efficiency pump and by operating it less.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Article describing the use of whole-house fans to provide cooling in the region surrounding Sacramento, CA.

Tool developed by LBNL to calculate potential savings from increasing wall and roof solar reflectance.

Article describing the importance of air sealing, insulation, and roof ventilation in reducing the likelihood of ice dam formation on roofs in cold snowy climates.

Technical fact sheet proving information on creating defensible space to reduce the risk of damage from fires to property.

Information sheet with safety tips for home owners on proper maintenance of clothes dryers.

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Document explaining requirements and recommendations for defensible space, with a focus on sloped vegetation.

Report describing guidance for selecting an electric vehicle charger

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Handbook to help property owners understand the rules, procedures, standards, and criteria that apply to the environmental resource permit (ERP) program under Part IV of Chapter 373 of the Florida Statutes.

Report describing construction site erosion and sediment control practices recommended and required by a county planning department.

This report evaluates the performance of variable-capacity comfort systems, with a focus on inverter-driven, variable-capacity systems, as well as proposed system enhancements.

Report about an experimental evaluation conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Factsheet for home and business owners describing ways to anchor fuel tanks to avoid displacement in floods.

Short guide from FEMA describing how to anchor tall bookcases and file cabinets during seismic events.

Document discussing methods to bioengineer stabilization of shorelines using living and non-living plant materials in combination, known as the “Living Shorelines” concept.

Summary document describing flood resistant building materials and some tips for building flood resistant walls.

Technical bulletin describing a set of standards for building materials able to withstand flood waters as needed with wet floodproofing.

Factsheet describing backflow valve benefits and tips.