Library

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Factsheet describing ways to install sheathing over existing 1x roof decking.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Standard that applies to storage water heaters, instantaneous water heaters, and circulating water heaters including booster water heaters; the current version of this standard was published in the year 2019 and it is available for purchase along with a digital preview on the ANSI webstore page.

Fact sheet defining a grid-interactive efficient building and its benefits.

Report evaluating HVAC building technologies based on their ability to provide grid services and the type of value provided, including efficiency, load shed, load shift, and modulation.

Report evaluating lighting and electronic building technologies based on their ability to provide grid services and the type of value provided, including efficiency, load shed, load shift, and modulation.

Report providing an introduction to core concepts of GEBs, and explaining how flexible building loads can be integrated and controlled to benefit consumers, the grid, and society more broadly.

Report addressing the current state of these technologies and the challenges of adapting these to the GEB context.

Report focuseing on dynamic window and opaque envelope technologies for GEBs, including electrochromic glazing, automated attachments, and thermal storage.

Website article touring areas hit hardest by tornadoes to see how they are building differently to protect against the next big twister.

Report describing tsunamis and options for vertical evacuation from tsunamis; the guide addresses determination of tsunami and earthquake loads and structural design criteria and concepts, primarily for commercial buildings.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Report discussing the potential energy savings of new high-efficiency downlights, and the results of product testing to date.

Article from RMI on how climate change is leading to an increase in critical extreme heat hours and what smart building strategies can be taken to mitigate some of these effects including paint color and insulation.

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Factsheet describing proper methods for installing vinyl siding and soffit coverings in high wind and coastal areas.

A factsheet providing information on how to prevent pests from entering the home by sealing cracks and openings.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Article describing methods for designing and constructing multifamily buildings with insulating concrete forms (ICFs).

Report describing ways to retrofit a home to make it more hurricane resistant.

Guide describing tools for island and hurricane-prone communities on redevelopment and rehabilitation of homes to prepare for future natural disasters.

Webpage describing a lightbulb exchange program in Fairfax county, VA.

A webpage outlining CAL FIRE’s recommendations for creating defensible space.

Webpage from Boston Solar describing how solar plus storage options can be beneficial for maintaining electricity during power outages.

Article describing how moisture accumulates inside of structures and issues that result.

NFPA standard for design and installation of indoor automatic fire sprinkler systems.

A nine-part fact sheet covering a variety of common questions surrounding wildfires and how to make a home more resilient to wildfires.

Report providing information on performance of mortars and concrete containing PCMs.

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Webpage describing steps homeowners can take to prepare their home and car for winter storms.

Webpage describing steps homeowners can take to prepare their home and car for winter storms.

Webpage providing guidance for homeowners on how much snow weight a typical roof can handle and when to consider removing snow from the roof.

Report providing wildfire protection guidance for homeowners in California.

Report aiming to "de-mystify" technology and economic considerations of residential PV systems.

Report describing methods for reducing the cost of electric vehicle charging infrastructure.

Report identifying efficient, connected, smart, and flexible GEB technologies and their future potential, including barriers and opportunities, recommendations for policymakers, and research needs.

A student manual for containing information on residential sprinkler systems.

Report describing the costs, benefits, and challenges of attic insulation retrofits in HUD-code manufactured homes.

Report seeking to teach building contractors and building inspectors the correct methods for doing typical seismic retrofits that have been designed by an engineer or architect or described in a prescriptive standard.

Webpage describing the basics of solar plus storage operations on homes.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the current version of the standard, published in the year 2019...

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...