Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2009 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2012 edition of code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions for one- and two-family residences.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for New Homes.

Standard providing a methodology for calculating Energy Rating Index for code compliance.

Standard providing master specifications for closed cell, medium density spray polyurethane foam air barriers located in the non-accessible part of the wall.

Standard providing information about self-adhered sheet air barriers located in the non-accessible part of the wall and materials to bridge and seal air leakage pathways and gaps.

Standard providing nationally recognized, manufacturer-endorsed set of inspection tasks for HVAC maintenance.

Report describing approaches to using less wood in home building that minimize waste.

Fact sheet describing advanced wall framing.

Article describing recessed lighting, which if installed incorrectly may contribute to air leakage and compromise building envelope efficiency.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

A publication highlighting recommendations that contribute to improved overall performance in the structural shell and focus on good connection details to tie together exterior walls, roofs and floors.

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

Webpage from Suntegrity Solar describing different backup power generator options to prepare for future power outages.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Fact sheet describing basement insulation considerations.

Web based tool providing decision-making guidance for selecting wall assembly components.

2019 version of California's plumbing code.

Information sheet containing images and descriptions of cantilevers.

Web article describing utility customer’s right to use back-up generators during emergency events, including Public Safety Power Shutoffs (PSPS).

Website of the Cold Climate Housing Research Center.

Installation manual for installing metal panel siding.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Article summarizing the IBHS stance on building practices that can mitigate the impact of high winds and storm surge on structures.

Study investigating measured cooling energy performance in side-by-side identical homes with varying roof types, including cool roof technologies.

Study reporting the results of comparative testing of the effect of finished and unfinished metal roofing systems on cooling energy performance in a test facility.

A fact sheet providing information on termite species and how to prevent them from entering into your home.

Webpage explaining what causes the formation of ice dams on roofs and steps to take to prevent them.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Article from The Home Energy Community of Practice on designing energy efficient homes in hot climate zones, including home orientation, window location, and roof design considerations.

Checklist for the DOE Zero Energy Ready Home National Program Requirements Mandatory Requirement 7 (Renewable Ready).

Checklist describing solar water heating recommendations per the DOE Zero Energy Ready Home program.

Technical report describing a market assessment conducted on new home builders' window purchasing practices revealing insights to inform the development of thin triple-pane windows, utilizing a center pane of thin glass and krypton gas fill to achieve the performance of standard triple-pane windows...

Report covering the rainwater performance of building assemblies.

Computer simulations comparing International Journal of Advanced Structural Engineering wind pressure differences between a gable-ended roof versus a hip roof versus a pyramidal-shaped roof.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Article from NAHB research center describing home building techniques for homes in hot climate zones.

Calculator to help homeowner's calculate the size of pool pump they need.

Technical report detailing the vulnerabilities of the U.S. electric grid to weather-related failures.

Technical report describing the impact of orientation on thermal comfort.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Article defining terms and testing requirements for fire-resistant construction materials including combustible, noncombustible, fire-resistant or fire-resistance, and ignition-resistant.

Study reporting the results of comparative testing of the effect of various roof types on cooling energy performance in a test facility.

Article describing the history and the current debate about how to adjust the Florida building codes.

Fact sheet describing the acceptable underlayment alternatives including ASTM D6757 Underlayment Felt Containing Inorganic Fibers for Steep-Slope Roofing for certain applications.