Library

List of products approved by the Master Painters Institute.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Information sheet providing guidance about the placement of ventilation approaches.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Article describing airflow within buildings due to pressure differences.

Webpage from DOE describing how to conserve energy and save money with a home energy audit.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

DOE case study findings on raised ceiling interior duct systems.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

A report presenting alternative approaches for reducing the costs of roof-mounted, grid-connected photovoltaic (PV) systems.

The ENERGY STAR criteria for refrigerators, refrigerator-freezers, and freezers.

A user forum discussing ways to reinforce a gable overhand that was framed using the ladder method by Mike Mahan.

Website tool intended to guide home builders in assessing whether a new home has the proper physical orientation to support a future installation of a solar energy system.

Website with information and research about residential hot water distribution systems.

Report evaluating mechanical AC precooling strategies in homes as a method for improving the load factor by shifting cooling operation from on-peak to off-peak hours.

Brochure with information on residential solar hot water systems.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Webpage with guidance document detailing voluntary interim guidelines for conducting home energy ratings on multifamily residential buildings.

Resource to help builders better understand the WaterSense requirements for labeled homes and assist them in meeting the criteria so they can receive the label for their new construction.

Technical paper covering the retrofit of unreinforced masonry buildings.

Article describing how replacing permanent split capacitor (PSC) motors with electronically commutated motors (ECM) can boost bottom line for HVAC contractors as well as improve customer comfort and satisfaction.

Manual describing methods for rodent-proofing buildings.

Factsheet describing air-sealing.

Standard using deficiency-based and systematic procedures that use performance-based principles to evaluate and retrofit existing buildings to withstand the effects of earthquakes.

Technical study exploring the impact of different installation faults on heat pump performance in a single-family house.

Study conducted to help determine cost-effective solutions for heating and cooling houses that are designed to be energy efficient.

Website providing information about INSULSPAN structurally insulated panels.

Website providing consumers with resources to find, select and install heat pump water heaters.

Proposed HVAC filter labeling standard and underlying analysis by the California Energy Commission.

Standard document establishing construction standards for one- and two-family dwellings constructed in high wind regions.

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Fact sheet describing water management in a residential building.

Image depicting damage from termites in weatherboard cladding.

An introduction to the insect termites.

Fact sheet describing building codes, seismic codes, and code enforcement.

Report sumarizing a workshop to initiate a professional discussion about eventual benefits of the application of massive technologies in US buildings.

Article on thermal protectors in recessed light fixtures.

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Resource that provides a checklist of program criteria for water-efficient new homes under the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

Guide designed to help builders better understand and meet the hot water delivery system criteria as specified in EPA's WaterSense New Home Specification.

Report assessing the performance and cost-effectiveness of a zero net energy community project in Davis, CA.

Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...

An example of wildland urban interface construction requirements for new buildings built in very high fire risk zones/areas.

Manual providing engineered and prescriptive design requirements for wood frame construction used in one and two-family dwellings.

Report describing Net Zero house design with sloped roof assemblies.