Skip to main content

Showing 1 - 31 of 31 results:

Publication Date
·
Author(s)
Handegord Gustav O
·
Organization(s)
Ontario Building Envelope Council
Description
Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...
Publication Date
·
Author(s)
Fugler Don
·
Organization(s)
Canada Mortgage and Housing Corporation,
CMHC,
Environment Canada,
Health Canada,
U.S. Department of Energy,
DOE
Description
Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.
Publication Date
·
Author(s)
Air Infiltration and Ventilation Centre
·
Organization(s)
AIVC
Description
Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.
Publication Date
·
Author(s)
Van der Meer Bill
·
Organization(s)
National Association for State Community Services Programs,
NASCSP,
Weatherization Training Center at Penn College,
Pennsylvania College of Technology,
PCT
Description
Technical article describing issues and moisture concerns related to weatherization efforts.
Publication Date
·
Author(s)
California Energy Commission,
Enermodal Engineering Limited
·
Organization(s)
CEC,
EEL
Description
Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...
Publication Date
·
Author(s)
Carpenter Stephen C,
Schumacher Christopher
·
Organization(s)
American Society of Heating Refrigerating and Air-Conditioning Engineers,
ASHRAE
Description
Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.
Publication Date
·
Author(s)
Barkaszi Stephen F,
Dunlop James P
·
Organization(s)
Florida Solar Energy Center,
FSEC
Description
A research paper exploring the installation and mounting of solar photovoltaic (PV) panels on rooftops and the challenges faced by system designers and installers.
Publication Date
·
Author(s)
National Renewable Energy Laboratory
·
Organization(s)
NREL
Description
Provides consumers with general information on solar water heating systems and how to select a contractor.
Publication Date
·
Author(s)
Minnesota Department of Commerce Energy Information Center
·
Organization(s)
Minnesota Department of Commerce
Description
Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.
Publication Date
·
Author(s)
Sol*id*ar Planungswerkstatt Architects and Engineers,
et al.
·
Organization(s)
International Energy Agency,
IEA
Description
Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.
Publication Date
·
Author(s)
Ahmad Shakeel,
Kumar Krishen
·
Organization(s)
Aligarh Muslim University,
University of Roorkee
Description
Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.
Publication Date
·
Author(s)
Kashuba Scott D,
Kuzik Mark D,
Hatzinikolas Michael A
·
Organization(s)
Canadian Masonry Research Institute,
CMPA
Description
Report describing the testing of various siding materials for their ability to resist bullets from small firearms.
Publication Date
·
Author(s)
Wisconsin Focus on Energy
·
Organization(s)
Wisconsin Focus on Energy
Description
High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.
Publication Date
·
Author(s)
Commonwealth Scientific and Industrial Research Organisation
·
Organization(s)
CSIRO
Description
Image depicting damage from termites in weatherboard cladding.
Publication Date
·
Author(s)
Pierce Jim
·
Organization(s)
Independent Alliance of the Electrical Industry,
IAEI
Description
Article on thermal protectors in recessed light fixtures.
Publication Date
·
Author(s)
Ueno Kohta
·
Organization(s)
Building Science Corporation,
BSC
Description
Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.
Publication Date
·
Author(s)
Lstiburek Joseph W
·
Organization(s)
Building Science Corporation,
BSC
Description
Document outlining a well-detailed drainage plane and flashings.
Publication Date
·
Author(s)
Cheple Marilou,
Huelman Patrick H
·
Organization(s)
University of Minnesota,
UMN,
American Society of Heating Refrigerating and Air-Conditioning Engineers,
ASHRAE,
NorthernSTAR,
NSTAR,
Oak Ridge National Laboratory,
ORNL
Description
Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...