Library

Article describing products that can enhance the efficiency and safety of clothes dryer vents.

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Document describing advancement in factory built housing innovations.

Paper discussing innovative strategies for improving ventilation systems in high-rise apartment buildings, focusing on compartmentalization and controlling stack effect pressures to enhance indoor air quality and energy efficiency published in the Proceedings of the Eighth Conference on Building...

Report describing advanced framing techniques, including discussion of cost and energy savings.

Document reporting results from a study done to evaluate effects of automotive emissions from attached garages on the indoor environment.

Technical fact sheet describing ways to construct asphalt shingle roofs to be more resistant to high winds and hurricanes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing information for builders and retrofitters about eliminating hazards and coincidental energy losses that come from attached garages.

Fact sheet describing recommended practices for installing brick veneer that will enhance wind resistance in high wind regions and examples of proper installations and brick veneer tie spacings; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Document providing background and approach for the prep work necessary prior to adding attic insulation - focusing on combustion safety, ventilation for indoor air quality, and attic ventilation for durability.

Technical article describing issues and moisture concerns related to weatherization efforts.

Article describing different kinds of water-resistant backer boards.

Research study discussing how housewraps restrict or permit the passage of water molecules based on size, but cannot control the direction in which the water vapor molecules move.

Document providing guidance to U.S. home builders who want to accept the challenge.

Report summarizing the guidelines for developing and reporting analytical results in a consistent and meaningful manner for all home energy uses.

Report investigating implementation of advanced framing in both production and prototype built homes built in a variety of climate regions across the USA.

Research study describing a number of promising foundation and basement insulation strategies that can meet the requirement for better thermal control in colder climates while enhancing moisture control, health, and comfort.

Report comparing a variety of roof insulating strategies to present their advantages and disadvantages according to several comparison criteria.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Document detailing how to build radon-resistant homes.

Report describing ventilation system design, including a central fan integrated supply (CFIS) system, made up of a 6-inch outdoor air intake duct connected to the return side of the air handler with a fan cycling control to make sure the fan runs a programmed minimum amount of time.

Document with information from a workshop addressing framing materials for residential buildings in California. A copy of the document can be requested at the resource link, and an online copy of the document can be found by searching for it on the California Energy Commission's Library Online...

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Fact sheet providing guidance and best practices on the selection of building materials used for coastal construction, and discussing flood, wind, corrosion, decay resistance, and protection recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Fact sheet describing the characteristics that make for a successful coastal residential building, including design and construction recommendations; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Information sheet with construction details, pros and cons of insulated concrete forms.

Fact sheet summarizing NFIP requirements, general guidelines, and recommendations concerning the construction and installation of decks, access stairs and elevators, swimming pools, and accessory buildings under or near coastal residential buildings; also published in FEMA P-499 “Home Builder’s...

Fact sheet describing design and construction practices that reduce the likelihood of flood damage in the event that flood levels exceed the BFE, including illustrations of appropriate construction practices; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Document providing design guidance and software tool information for forced-air HVAC systems.

A research paper exploring the installation and mounting of solar photovoltaic (PV) panels on rooftops and the challenges faced by system designers and installers.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Presentation describing the history of ECM motors, an overview of ECM motor technology, and a lesson on the installation of ECM motors.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Study presenting generalized results regarding the effect of surface orientation on annual incident solar radiation for locations in the United States.

Fact sheet describing requirements and recommendations for enclosures and breakaway walls for their use below the BFE, including a diagram of a compliant wall system and examples of systems that have either resulted in increased damages or increased flood insurance premiums; also published in FEMA P...

Presentation about results from an insulating concrete form energy efficiency study in Knoxville, TN.

Paper describing the effects of tree shade on residential electricity consumption and energy savings in summer and winter.

A standard providing minimum energy efficiency requirements for buildings that are not low-rise residential buildings.

Report evaluating the accuracy of the regression technique used in 2006 by using the same least-squares regression analysis on data created from hourly energy simulation software.

Document providing an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX.

Report on the performance of range hood exhaust fans.

Report presenting the process of a residential retrofit project for houses in the states of Florida and Alabama, including findings at the time of reporting and highlights of the first home to meet the target HERS Index of 70.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Information sheet about what length screws should be used, and how closely to space the screws when fastening furring strips to a foam-sheathed wall.

Map of the wind-borne debris region of Florida

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.