Library

Brochure describing the benefits of air-sealing for homeowners.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Technical article describing issues and moisture concerns related to weatherization efforts.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Case study characterizing the framing factors for the exterior walls, ceilings, and floors of 180 wood-framed low-rise residential buildings across the United States.

Attachment or installation of foundations, floors, roofs, insulation, utilities, and finishes to concrete masonry walls as well as on special tools and fasteners available for use with concrete masonry.

Short report providing tips on how to reduce heat gain and passively cool a home.

Provides consumers with general information on solar water heating systems and how to select a contractor.

Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.

Report sumarizing results of an ICF investigation of side-by-side houses in Knoxville, Tennessee.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

A publication describing how to protect coastal investments by adapting to natural processes and protecting coastal environments and shorelines.

Technical article presenting the results of an analysis on the effect of insect screens on window solar heat gain coefficients and U-values.

Article discussing moisture control in buildings as well as building design and construction strategies for keeping buildings dry and allowing buildings to dry out if they do get wet.

Guide for electrical systems design including installation guidance and best practices for flood-prone areas.

Guide for fuel systems design including installation guidance and formulas for calculating loads and buoyancy forces for specifying number, type and capacity of strapping for hold-downs in flood-prone areas.

Standard providing information on contractors who offer radon control services to homeowners.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Document describing correct construction of swales, designed to trap particulate pollutants (suspended solids and trace metals), promote infiltration, and reduce the flow velocity of storm water runoff.

Document summarizing the various papers on unvented conditioned cathedralized attics found on BSC's website.

Report focusing on the performance and durability of unvented-cathedralized attics in hot-humid climates with both tile and asphalt shingle roofing.

Document outlining a well-detailed drainage plane and flashings.

Brochure about how to install and use a whole-house fan.