Library

In this report, BSC seeks to research and report on the field monitoring of the performance of in-situ supplemental dehumidification systems in low-energy, high performance, homes in a hot-humid climate.

Technical report describing the evaluation of four different ventilation strategies for providing make-up air in high-performance, new construction multifamily buildings in the Northeast, emphasizing the challenges posed by increasing airtightness standards and the variability of system performance...

Report describing research that helps inform best practices for air-sealing multifamily buildings in the Northeast.

Article describing RESNET guidance on evaporative coolers.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

FSEC PDF guide on effective fan types and placement in the Southeast.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Website with information for consumers about solar thermal systems for homes.

Detailed information about Formaldehyde including health effects and strategies to reduce exposure.

Article describing frost-protected shallow foundations with construction drawing details.

Website with prepopulated information about the United States renewable resources.

Website providing information about the Gossamer Wind Series Ceiling fans, conceived by Danny Parker at the Florida Solar Energy Center as a means of realizing the energy efficiency and comfort potential of ceiling fans.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Report describing for homeowners how to protect their homes from flooding, 3rd Edition.

Article describing the impact of stack effect on building performance, highlighting how pressure differences caused by temperature and height affect air infiltration and exfiltration, and detailing strategies like compartmentalization and distributed mechanical systems to manage airflow and maintain...

Article describing the stack effect in buildings.

Standards criteria supporting ICC HVAC duct support standards.

Report summarizing the status of a central hydronic heating system project in multifamily housing at the conclusion of the 20112012 heating season.

Recommendations from IBHS describing how to safely use generators during winter storm power outages.

The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Guideline describing information and specifications relevant to air-seal existing attics.

Report describing recommendations for optimizing flexible duct, constant-volume HVAC systems using junction boxes.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Report describing solutions for supplemental dehumidification in warm-humid climates.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

List of products approved by the Master Painters Institute.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Information sheet providing guidance about the placement of ventilation approaches.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Article describing airflow within buildings due to pressure differences.

Webpage from DOE describing how to conserve energy and save money with a home energy audit.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

DOE case study findings on raised ceiling interior duct systems.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

The ENERGY STAR criteria for refrigerators, refrigerator-freezers, and freezers.

A user forum discussing ways to reinforce a gable overhand that was framed using the ladder method by Mike Mahan.

Website tool intended to guide home builders in assessing whether a new home has the proper physical orientation to support a future installation of a solar energy system.

Website with information and research about residential hot water distribution systems.