Library

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Research study estimating potential energy savings relative to conventional ducted air distribution, and identifying equipment requirements, costs, and barriers.

Report describing an air distribution system composed of a series of uniformly-sized ducts that terminate in rooms throughout the home and return to a central manifold, similar in fashion to a “home-run” cross-linked polyethylene plumbing system.

Standard outlining industry procedure for sizing residential duct systems.

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Document providing guideance and considerations for duct design in an energy efficient house.

Report describing two retrofit duct sealing techniques - manually-applied sealants and injecting a spray sealant, that were implemented in several low-rise multi-unit buildings in North Carolina.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Report summarizing systems research activities for new housing in hot-humid climates, including NightCool, interior duct systems in manufactured housing, ventilation and dehumidification, plug load reduction and solar and conventional hot water.

This ANSI/RESNET/ICC standard provides a consistent, uniform methodology for evaluating the airtightness of building, dwelling unit, and sleeping unit enclosures and heating and cooling air distribution systems, and the air flows of mechanical ventilation systems.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

ASTM standard providing test methods for determining duct air leakage in low-rise residential and commercial buildings.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Brochure intended to provide readers with a working knowledge of residential heating and cooling duct systems.

Brochure with details on HVAC duct air sealing.

Brochure with information about ducts in conditioned space.

Report describing the recommended best practices to achieve energy savings without compromising health or safety.

Case study about Artistic Homes of Albuquerque, New Mexico, the first home builder in the United States to offer true net zero energy construction to the average home buyer on every home it builds.

Document describing the Building America research benchmark for the residential building program.

Training manual on how to locate ducts within conditioned space and compact design.

Reference investigating the strategy of using buried and/or encapsulated ducts to reduce duct thermal losses in residential buildings.

Report about City of Meriden Housing Authority's (MHA) collaboration with Jonathon Rose Companies to complete a gut renovation of 126 residential units in the Chamberlain Heights retrofit project.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

Report summarizing one year of monitoring and analysis of the effectiveness of a space conditioning system at maintaining temperature and relative humidity levels in a test home, as well as room-to-room differences and the actual measured energy consumption by the space conditioning system.

Report on heating and cooling air-distribution ducts that are insulated, installed close to the ceiling in a vented attic and covered with attic insulation to minimize energy loss.

Report on experiments comparing the cooling and heating seasonal and peak demand performance of different variable-capacity air conditioning and heat pump units.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

Document comparing simulation results from a modified version of the EnergyGauge program to include various HVAC runtime strategies.

Research study describing experiments run in an unoccupied 1600 square foot house to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump.

Document reviewing four cold-climate northern Illinois energy efficiency retrofit programs to identify practices, tools, and approaches to streamline and reduce costs of comprehensive retrofits, and to improve the consistency of audit and retrofit delivery practices across different programs.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Expert meeting describing meeting details for recommendations for applying water heaters in combination space and domestic water heating systems.

Expert meeting held to discuss simplified space conditioning systems in low load homes, including the relationship between advanced thermal enclosures, space conditioning systems and comfort.

Expert meeting held to review and discuss results and future plans for research to improve the performance of hydronic heating systems using condensing boilers and baseboard convectors.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Presentation about proper installation of flexible ducts.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Standards criteria supporting ICC HVAC duct support standards.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Report summarizing approaches to addressing duct leakage in hot humid climates.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.